Kallax/Dröna swappable box label
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A swappable label designed for Dröna boxes (the fabric ones that fit in a kallax)
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 268
- Makes
- 6
- Views
- 1,296
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
This is a clean, swappable label for Dröna/kallax boxes (but should work for anything with a 4mm lip)
Can be printed upright with no supports.
Use the text feature in prusaslicer/bambu studio (and possibly others, I haven't checked). To add text to the blank label (inside the border).
If you want to do fancy mult-material printing, the blank label is 3mm high, so anything above that should be text.
I created this to replace traditional sticky labels (that you can still see in the photos) as they were difficult to read from a distance, and people kept putting boxes back in the wrong slot.
If you don't want to bother with the label itself, a piece of paper/card 55x39mm would also work. (rought 2" x 1.5" I believe)