1 / 15
10 inch Rack 2U : 6 x 3.5 inch HDD - HOT SWAP ! — zdjęcie 1
1 / 15

10 inch Rack 2U : 6 x 3.5 inch HDD - HOT SWAP !

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

10 inch Rack 2U : 6 x 3.5 inch HDD - Hot Swap ! Compact ! but experimental.... Print at your own risk.

Ocena
5 / 5
Polubienia
418
Pobrania
2007
Wydruki
11
Wyświetlenia
18 937
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Standard Digital File License

⚒ No 3D printer? No time to source components?
I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop

Discover my other hot‑swap storage projects:

 

2.5" HDD/SDD

←←← COMBO! →→→

3.5" HDD/SDD

1U

1U: 4x 2.5" HDD/SSD

1U: 2x 2.5" + 1x 3.5" HDD

1U : 2x 3.5" HDD

1U : 4x 2.5" HDD + 3x Keys.

1U: 2x 2.5" + 1x 3.5" + 1 Key

1U: 1x 3.5" HDD + 6x Keys

2U

2U: 10x 2.5" HDD

2U: 5x 2.5" + 3x 3.5" HDD

2U: 6x 3.5" HDD

 

Others

3U

3U: 8x 3.5" HDD

3U: 7x 3.5" HDD

 

0.5U

0.5U: 5x Keys + 1x 2.5" HDD

0.5U: 2x 2.5" HDD & 2 Keys

0.5U: 2x 2.5 inch HDD


a 10 inch Rack 2U : 6 x 3.5 inch HDD - Hot Swap ! Compact !

Design:

  • All tolerance are the same as for the 2x 3.5 HDD model

  • HOT SWAP is possible. I really wanted that feature and couldn't find it anywhere on printable/makerworld

  • Satisfying Click!

  • Extremely compact ! only takes 2U for 6HDD

  • Experimental… As the design is REALLY compact i'm not certain about heat dissipation, or rather, i'm certain that there is NONE for the center HDDs. USE AT YOUR OWN RISK…

  • I suspect the screws for the bottom and middle connector might be hard to tighten… Choose HEX M3x12mm self-tapping screws and follow the pictures

Print:

  • No support ! Print face down

  • Tolerance are quite tight, make sure to take your time to print it (I used 0.4mm nozzle, 0.2mm layers)

Other Material:

I use those refurbished caddy from Aliexpress:

keywords: " 3.5'' SAS SATA Hard Drive Tray Caddy for Dell PowerEdge R730 730xd R720 R720XD R710 R520 R410 R420 T420 T620 T630 058CWC 0KG1CH "
" For Dell PowerEdge T330 T430 T630 R230 R330 R430 R530 R630 R730 R730XD 0KG1CH 3.5" SAS SATA Hard Disk Caddy Tray KG1CH "

Each tray is about 5eur:

For the Hot swappable connection:

I used those:

keywords: SATA Male To Female Power Data Converter 22Pin 7+15 Male To Female SATA To SATA Converter SATA To SATA Adapter

Currently 5eur for 5 !: 

Tagi