Haughton Elevator Emblem (Newer Variant)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replica of the emblems found on the car floor of some Haughton elevators installed in the 1960s.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This specific Haughton Elevator Company emblem was used as a small hatch covering the emergency brake release keyhole on traction elevators installed in the 1960s. The design allows for flexibility when printing, although I suggest doing the following:
Slicing
Both STL files should already be correctly scaled (3.75 in side length for the frame, and 3.175 in diameter for the actual logo).
As for printing bed layout, my test print was positioned as shown:
The actual printing requires no supports to be generated.
Assembly
Once your print is finished, make sure the logo fits snugly into the frame. Just like the actual thing, the logo comes off to reveal where the emergency brake release keyhole is. While both printed parts should securely fit together, if you do not want the logo to be removed, I would suggest gluing it down.
If you have any feedback or questions, please do not hesitate to comment!