Korg Volca mount for Arturia Keystep
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this stand you can mount the Korg Volca series synthesizers on Arturia Keystep 32.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
With this stand you can mount the Korg Volca series synthesizers on Arturia Keystep 32. This allows you to free up the space on the table, and also in this way Korg Volca doesn't block the cables and ports on the back side of Arturia Keystep.
Make sure that when you mount it on Keystep, the mount doesn't overlap with the screws on the bottom plate of the keystep, this will cause imbalance on keystep. The underside thickness of the mount is 3mm, so it is less than the thickness of the rubber feet. Such that it will not cause the keystep to wobble.
Assembly:
1) Mount both mounts on Keystep.
2) Slide in the Korg Volca from the side horizontally in to the mount.