USB Power Delivery 5V Splitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple (magnetic) housing for a USB Power Delivery (USB PD) compatible splitter that outputs 5V via two USB A ports.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Simple (magnetic) housing for a USB Power Delivery (USB PD) compatible splitter that outputs 5V via two USB-A ports, powered by a single USB-C port.
Make sure that you know what you are doing. Playing with electronics can be dangerous. I will not take responsibility for your actions.
If you like this design, please consider leaving a ♥heart. Thanks!
----------
Parts
USB Type-C breakout board
[2x] USB Type-A breakout board
[3x] Magnets, 6 mm diameter, 2 mm high
Some spare wires, solder, etc.
----------
Assembly
The USB Type-C breakout board should be set up with resistors that communicate to the power supply that it needs to be fed with 5V via the Power Delivery standard.
(Optionally) Insert the three magnets into the base.
Put the three boards into the base element.
Cut four pieces of wire into the correct lengths.
Take the boards out and solder them:
Connect all three pads marked
VBUS.Connect all three pads marked
GND.Optionally, you could connect the data lines
D+,D-) between USB-C and ONE USB-A port as well to allow for USB 2.0 data transmission on this port.
Put the boards back in and put the lid on.
----------
Printing
Filament material: PETG
Resolution: 0.20 mm
Infill: 20 % Grid
Supports: No