1 / 3
Lea the Truck base for bearing 22x8x7 — zdjęcie 1
1 / 3

Lea the Truck base for bearing 22x8x7

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Base of Lea the Truck for bearing 22x8x7 and full tpu wheels

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Share Alike

Please note: This model contains non-printable parts. Specifically, you will need four 22x8mm inner radius x 7mm width bearings. These bearings must be firmly seated on the axles using a hammer or press.


It's recommended to print the base with a 3-layer wall thickness. The wheels are designed for printing without infill.

Tagi