1 / 3
Lea the Truck base for bearing 22x8x7
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base of Lea the Truck for bearing 22x8x7 and full tpu wheels
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
Please note: This model contains non-printable parts. Specifically, you will need four 22x8mm inner radius x 7mm width bearings. These bearings must be firmly seated on the axles using a hammer or press.
It's recommended to print the base with a 3-layer wall thickness. The wheels are designed for printing without infill.
