1 / 4
Compact Hoods for Brightin Star 35mm f/0.95 — zdjęcie 1
1 / 4

Compact Hoods for Brightin Star 35mm f/0.95

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Several variations of a flat push-on protective hood for bad lens Brightin Star 35mm f/0.95

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Several variations of a flat push-on hood for the Brightin Star 35mm f/0.95.
For the record, I don't recommend this lens, you probably shouldn't buy it unless you find one very cheap on ebay. But if you do, you can use this on it, I guess? dfsjkl

These probably shade the lens a little, but the main intent is to prevent accidental lens-touching while using the camera out and about without a lens cap - while being less bulky than a metal screw-on hood for example. 

It just pushes onto the lens, there's a gap in the top and a line so you can line it up straight, but there's a lot of wiggle room before it vignettes. Print front side down.

Versions

1. Squarish

Option with a squarish style but with the top and bottom of the opening curved out wider to avoid cutting off bokeh.

2. Round

Simple round opening which does not cut off bokeh, but does leave the lens a bit more open.

1. Rectangular 

Most protective option. It shouldn't vignette, but it can cut off the edges of the bokeh with the lens wide open. Depending upon what you're shooting and whether you're stopped down it might not be noticeable, so it might not be an issue. 

Tagi