Compact Hoods for Brightin Star 35mm f/0.95
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Several variations of a flat push-on protective hood for bad lens Brightin Star 35mm f/0.95
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Several variations of a flat push-on hood for the Brightin Star 35mm f/0.95.
For the record, I don't recommend this lens, you probably shouldn't buy it unless you find one very cheap on ebay. But if you do, you can use this on it, I guess? dfsjkl
These probably shade the lens a little, but the main intent is to prevent accidental lens-touching while using the camera out and about without a lens cap - while being less bulky than a metal screw-on hood for example.
It just pushes onto the lens, there's a gap in the top and a line so you can line it up straight, but there's a lot of wiggle room before it vignettes. Print front side down.
Versions
1. Squarish
Option with a squarish style but with the top and bottom of the opening curved out wider to avoid cutting off bokeh.
2. Round
Simple round opening which does not cut off bokeh, but does leave the lens a bit more open.
1. Rectangular
Most protective option. It shouldn't vignette, but it can cut off the edges of the bokeh with the lens wide open. Depending upon what you're shooting and whether you're stopped down it might not be noticeable, so it might not be an issue.