Brilliant Lighting Intelliscanner To Voltex OMS-360 PIR Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount a Voltex OMS-360 PIR sensor over where a Brilliant Lighting PIR was located without additional fixings
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I needed to replace a failed Brilliant Lighting Intelliscanner PIR sensor for outdoor lighting. I opted to move over to a Voltex OMS-360 PIR sensor instead as technology has progressed over the last decade and the Voltex is a much better sensor. As the mounting location is on a rendered architectural wall, I made this adapter so I didn't need to put additional fixing holes in the wall and can use the existing fixing points.
I installed heat set inserts into 4 of the mounting holes to mount the Voltex PIR to the adapter and use M4 x 10mm bolts. It is optional if you want to apply a gasket or sealant bead but the Voltex design makes that optional and not really required when mounted on a vertical wall.
If you do use this, it'll be a good idea to use an adhesive foam strip on the back as a gasket to keep rain out of the electrical connections or a small bead of silicone sealant.