Brilliant Lighting Intelliscanner To Voltex OMS-360 PIR Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to mount a Voltex OMS-360 PIR sensor over where a Brilliant Lighting PIR was located without additional fixings
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
I needed to replace a failed Brilliant Lighting Intelliscanner PIR sensor for outdoor lighting. I opted to move over to a Voltex OMS-360 PIR sensor instead as technology has progressed over the last decade and the Voltex is a much better sensor. As the mounting location is on a rendered architectural wall, I made this adapter so I didn't need to put additional fixing holes in the wall and can use the existing fixing points.
I installed heat set inserts into 4 of the mounting holes to mount the Voltex PIR to the adapter and use M4 x 10mm bolts. It is optional if you want to apply a gasket or sealant bead but the Voltex design makes that optional and not really required when mounted on a vertical wall.
If you do use this, it'll be a good idea to use an adhesive foam strip on the back as a gasket to keep rain out of the electrical connections or a small bead of silicone sealant.