Google Nest 2k Indoor Camera window mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Window mount for Google Nest Indoor camera, 2k and Gen before
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated.
Not the best, but it works for now. I may or may not update. I believe it's a 22.5 degree angle. Borders are big enough for double sided tape or tape the base to the window. Everything is 4mm thick. Recommended to print with supports, I had some overhang curling. I used elegoo carbon to print under these settings and took under 3 hours. I taped it on for now.
Quality & Strength
Layer Height: 0.20 mm
Wall Line Count: 8 to 10 Walls
Top/Bottom Shell Layers: 6 to 8 Layers
Infill Density: 30% to 40%
Infill Pattern: Gyroid or Cubic
Speed
First Layer Speed: 50 mm/s
Outer Wall Speed: 150 mm/s
Overhang Speed: 15 mm/s to 20 mm/s
Retraction Length: 0.8 mm to 1.2 mm
Retraction Speed: 40 mm/s