Google Nest 2k Indoor Camera window mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Window mount for Google Nest Indoor camera, 2k and Gen before
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated.
Not the best, but it works for now. I may or may not update. I believe it's a 22.5 degree angle. Borders are big enough for double sided tape or tape the base to the window. Everything is 4mm thick. Recommended to print with supports, I had some overhang curling. I used elegoo carbon to print under these settings and took under 3 hours. I taped it on for now.
Quality & Strength
Layer Height: 0.20 mm
Wall Line Count: 8 to 10 Walls
Top/Bottom Shell Layers: 6 to 8 Layers
Infill Density: 30% to 40%
Infill Pattern: Gyroid or Cubic
Speed
First Layer Speed: 50 mm/s
Outer Wall Speed: 150 mm/s
Overhang Speed: 15 mm/s to 20 mm/s
Retraction Length: 0.8 mm to 1.2 mm
Retraction Speed: 40 mm/s