Gatekeeper, Original lightsaber hilt design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hilt has a sentinel or guardian feel whether it's dark or light. Elegant and tactical.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Number 7 in the series. Once again it's compatible with parts of my other sabers. I opted to go without the switch module since it is already pretty long and has an auxiliary button anyways. So there is a Switchdelete module or you can go with the switch. You'll have to grab the file from another one of my models labeled SwitchHousing. Again if you want a more mechanical feel over gluing everything, you'll need a 3/32" rod for the shaft-crystal chamber connection (I get brass rod from Ace Hardware for $4) and you'll need a #6-32 x 1/2" machine screw and nut for the emitter. I glue pinCoverB and snap fit pinCoverA. That way you can disassemble. You also may want to glue the crystal to the top plate. May the force be with you!