Gatekeeper, Original lightsaber hilt design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This hilt has a sentinel or guardian feel whether it's dark or light. Elegant and tactical.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
Number 7 in the series. Once again it's compatible with parts of my other sabers. I opted to go without the switch module since it is already pretty long and has an auxiliary button anyways. So there is a Switchdelete module or you can go with the switch. You'll have to grab the file from another one of my models labeled SwitchHousing. Again if you want a more mechanical feel over gluing everything, you'll need a 3/32" rod for the shaft-crystal chamber connection (I get brass rod from Ace Hardware for $4) and you'll need a #6-32 x 1/2" machine screw and nut for the emitter. I glue pinCoverB and snap fit pinCoverA. That way you can disassemble. You also may want to glue the crystal to the top plate. May the force be with you!