1 / 6
Vertical laptop holder with table clamps (all parts FDM printed) — zdjęcie 1
1 / 6

Vertical laptop holder with table clamps (all parts FDM printed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

vertical laptop holder with clamps to fix to a desk

Ocena
0 / 5
Polubienia
7
Pobrania
37
Wydruki
0
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Wanted a clamping vertical laptop /notebook / tablet holder to declutter my desk:

Banana for scale!
No metal-hardware needed.

With my free standing adjustable desk normal holder seemed a bit risky to me.
Wanted something which would clamp to the desk and hold the USB-C Cable I use to connect to my docking station.

out came this: 
2 Part vertical stand with 3d printable screws for 30mm to 25mm desk plates. 
Material efficient and a bit of design elements to make it less soviet-brutalism ;-) 

Stand part:
There is a "left" and right. But you can use them as you like but:
Dont just mirror it in slicer, the thread will become left handed ;-)
Ask me how I know. IQ200 move.

The stand can fit a 31mm desk and the screw will clamp down to 24mm. 


Screw Part:
I made ith with ACME threads and 0.4mm added offset (0.2mm on each side)
Print the screws with some more walls and "strong" settings. 

As the screw is clamping PLA is NOT-advised. The continous strain on the part will surely cause relexation and the clamping force will suffer. 
I designed it that even without screwforce the thing will NOT fall off your desk and you will notice a problem before sacrificing your nice laptop to the gravity-gods. 

Let me know if you need a different plate size, some improvements or some printing problems. 
I am here to make the best version there is. This doesnt have to be fire-forget project if you dont want to ;-)

Tagi