Newtons Cradle (10 balls)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY art again. This time it's Newtons Cradle with 10 balls. :)
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 1266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- GNU General Public License v2.0
DIY art again.
This time it's Newtons Cradle with 10 balls. :)
Instructions
You will need about 2 meters of some 5 mm diameter rod.
10 balls (I used 40 mm steel balls).
About 4 meters of nylon string (depending of your chosen size of the cradle of course).
Superglue.
20 small screws to lock the nylon string with.
A base to build on (I used just normal 20 mm thick wood plank).
You can make the cradle in any (reasonable) size. :)
The hardest part is to line up all the balls. They have to be in line in all directions (X,Y and Z). This is why I used the "Screw-Lock-Function" on the Pole-Holders.
You can find all different versions of the parts in the SKP-file.
Good luck!
Category: Art