Newtons Cradle (10 balls)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY art again. This time it's Newtons Cradle with 10 balls. :)
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 44
- Makes
- 0
- Views
- 1,266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- GNU General Public License v2.0
DIY art again.
This time it's Newtons Cradle with 10 balls. :)
Instructions
You will need about 2 meters of some 5 mm diameter rod.
10 balls (I used 40 mm steel balls).
About 4 meters of nylon string (depending of your chosen size of the cradle of course).
Superglue.
20 small screws to lock the nylon string with.
A base to build on (I used just normal 20 mm thick wood plank).
You can make the cradle in any (reasonable) size. :)
The hardest part is to line up all the balls. They have to be in line in all directions (X,Y and Z). This is why I used the "Screw-Lock-Function" on the Pole-Holders.
You can find all different versions of the parts in the SKP-file.
Good luck!
Category: Art