Nespresso Vertuo Pop Larger Waste Pod Container/Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of external S-M-L-XL spent pod containers for a Nespresso Vertuo Pop+
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The internal factory spent pod container isn't very big and you often don't realize it's full until the pods back up or get crushed when you try to close the lid. The external container holds a lot more pods and you can see how full it is without having to take the cover off. In order to use the larger pod container you'll have to print the "Drip Tray" file that goes inside the brewer and fits together with the pod container. The container will need supports for the section that goes inside the nespresso brewer.
There 4 different sizes, small, medium, large and extra large. The extra large container comes out to be flush with the front of the brewer. The container shown in the model pictures is the small size.
As I was testing out the design I found that the momentum of the falling pods was enough to slowly bounce the container away from the brewer so I adjusted it to fit snuggly inside the brewer.
This design started as an accessory to work in conjunction with a riser for the Vertuo Pop+. The original design only worked with the riser. This model doesn't require the riser.
Here is the original riser model -