Liczymy pasujące modele…
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
This design allows you to easily store multiple coffee capsules (Nescafe Vertuo). Each insert can be pushed out and stores 7 capsules (size: Mug 230ml). The parts on the images was printed using following parameters: Color: Prusament PLA…
This is a Nespresso Vertuo Coffee Dispenser rack. The original model was found at thttps://makerworld.com/en/models.
Vertical dispenser for Nespresso Vertuo pods, using original boxes
This vertuo cup holder help you to refill Nespresso Vertuo capsule. Yous can buy " Aluminum Lids for capsules pods " Available at AliExpress or other inline resaler. You can use the upper section to press the lid on the capsule to get…
This model is a set of functional, 3D-printable tools designed to make reloading Nespresso Vertuo pods easy, clean, and repeatable. By using freshly ground coffee and a quality grinder, these tools let you refill Vertuo pods for a…
I accidently threw out my Nespresso waste bin so I thought I'd design one and share.
If you have a Nespresso Vertuo Pop+ and the cup holder is obstructed, this model will raise the machine up 38mm. Rubber feet are recommended to prevent the stand from moving around. This variety pack comes in handy for projects like this…
The internal factory spent pod container isn't very big and you often don't realize it's full until the pods back up or get crushed when you try to close the lid. The external container holds a lot more pods and you can see how full it is…
Each base holds 3x drawers and are stackable. Supports between drawers are designed to allow items (such as the Aeroccino milk frother) to be placed on top without impact the drawers' freedom of motion. Vertuo drawers can hold…
Drawer organizers that hold your vertuo pods. I printed these standing vertically using supports in the slits. You maybe don't need supports but I used a metal pick to remove the supports inside of the cuts which worked fine. I'd add the…
Nespresso vertuo capsule wall holder in the shape of a cup
Capsule holder for nespresso vertuo. It only has 1 side open, holds up to 6 capsules, but you can scale the length to get more or less capsules and make it fit for your needs. mine fits perfectly under an ikea wall cabinet.
Three separate part models includes the base, funnel/sealer & the taper/plunger. See photos for assembly. Print settings. Printed on a Bambu Labs P1S Filament: Polymaker PLA White Marble, Temp: 230F (the black specks tend to clog the…
The Breville Vertuo Nespresso coffee maker does not handle wide mugs very well. The mugs will tip over if not supported. I created this to prevent tipping and allow the use of wider mugs. While I didn't create an upper pop-out screen to…
Hello. This is my version of the Nespresso Vertuo capsule dispenser. For better insertion of a new cartridge, cut the flap with a scissor, hold the capsules inside with your index finger end slide the back side of the cartridge on the…
I like a big mug, and when trying to use the ones I like, they would balance precariously on the small surface provided. I made this one and now my machine can hold the larger mugs very securely. The grill was created using a modifier (0…
I created this box lid holder for the rails to know which capsule is which, Thank you for @ochm for great design https://www.printables.com/model/195627-nespresso-vertuo-capsule-dispenser I printed with petg no support needed
Needed a way to organize the Nespresso Vertuo capsules in our drawer so made a simple fix with this stand. I just nanotaped in to the bottom of the drawer to keep it in place.
The image is a version with a logo on the back panel, but the uploaded one is blank. I added the text in the slicer, so you can have whatever text you want. print the case with the back on the bed and pause to insert the plexi panel and…
I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…
This things is a magazine for 40 cups of the nespresso vertuo cups. You can put out one sleeve and chose your coffee. The whole thing is fixed by 20 M3 x 7mm cylindrical bolts and 20 normal sized nuts. these nuts you need to slide in to…
Dispenser for the Nespresso Vertuo cups. remixed the remix and embossed the ML and name on the front.
Choose this original because it can be nicely hooked, I only make some shims to had 40 and 80ml to fit the holder and decided to add a thin 230. Easy to install and everything is now No specific advice to print them, I use different layer…
This model is for refilling the Nespresso Vertuo Pods. I use Fanativia aluminum foil seal lids . The tamper is from @RileyPrice and is perfect for it.
I wanted a Vertuoline pods holder easy to print. Other designs are awesome, but I didn't want to print for 9h to 10h and didn't want to spend too much filament. It is minimalist, does not take too much space and is very stable.
The cup height for my Nespresso Vertuoline just isn't tall enough for my Swell coffee bottle I use for the morning commute. Ain't nobody got time to stand around and hold it for the 45 seconds it takes to brew an espresso, so I came up…
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
The original model is great. I added alignment holes and pegs. Nothing more. This is for anyone else like me who glues things like crap, and needs extra help for the otherwise straightforward task of smooshing two things together. I…
This riser will increase the height by 55mm / 2.1" to allow tall mugs and glasses to fit under the spout. Print the model face down, with the hole facing up to avoid support, and flip it over. I added rubber, non-slip coating to prevent…
The Nespresso Vertuo has a “pour-over” style 610ml pod, but containers to hold that much are often too tall to fit, so I made this riser base to allow a traditional pour-over Chemex style carafe to fit. To print, I had to split it in two…
It's a holder for coffee pods! Designed to hold most of a sleeve of Nespresso Vertuo pods - depending on the overall size they may all fit. Has a slot to hold the label for identification. Too many of the other options used the whole…
Bases to turn the Nespresso cardboard tubes into a table top gravity-fed dispenser system, you can stack two deep (regular base works with the espresso top)
Nespresso tower for 32 pods on the outside, and a few more in the interior section if needed. Measures 125mm x 125mm, Height 200mm
Nespresso Vertuo pack holder. Prints in two sections which can be glued together and should hold an entire package of Nespresso Vertuo pods.
This may work for other Nespresso machines, but was designed specifically with the Vertuo pop+ Raises the machine to let taller mugs and cups to fit under. The single piece part will fit on a 256x256 build plate.
Upgrade your coffee routine with The Vertuo Pillar Press , a stylish and functional tamping station designed for Nespresso Vertuo pods . This modular set includes: Base – A stable foundation to support tamping. Funnel – Helps guide coffee…
Stand for filling Nespresso Vertuo capsules. You can buy the reusable lid here: https://www.amazon.it/dp/B099WXCYGL?ref
When using this, also print the double vertuo holder 1 & 2 by ecarlson88 . My remix is an additional mid-section that fits together like a puzzle peice to make the whole thing longer. Really happy with how it turned out. Thank you for…
One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…
I printed with a 0.8mm nozzle so had no infill, came out great in my opinion. Tolerances are tight, supports should hold any normal mug you set on it. Does not have hooks, so will only work sitting on the counter.
I dropped the catch cup for my evoluo. The dumb little hook broke off. I printed another one. In the picture, the top is the OEM, the bottom is the FDM. There are two versions of this file, one that is all one piece and one that is three…
I remixed the original Vertuo Pop+ stand to create a riser that fits the Vertuo Pop. The main modification addresses the different water tank location between the two models. Additionally, I included a split version of the model, allowing…
Low-Profile Coffee Drip Tray (V2) Slim design for tall cups Textured surface with bumps prevents coffee drops from sticking to cups Improved hooks to sit flush with the counter For countertop use only - not for hanging Printing It will…
Nespresso Container Cover This cover is designed specifically to store your original Nespresso drip tray when not in use.
This is a simple drawer design I modeled to house the Nespresso Vertuo pods. I printed on Neptune 4 plus with 6mm, using SUNLU matte black PLA. any size nozzle should work just fine, I modeled it with pretty larger tolerances. I printed…
This is a Nespresso Vertuo Coffee Dispenser rack. The original model was found at thttps://makerworld.com/en/models.
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
A standing dispenser for Nespresso Vertuo capsules. Ideal for desks and people that do not like gravity fed systems. Comes in 5 snap fit pieces (1 bottom) (3 middle) (1 top) which holds up to 10 capsules. Capsules are very visible and…
This extension sits over the existing drip tray and is for a mug with a maximum of a 5 inch base. The original Nespresso Vertuo drip tray is NOT replaced with this. The original Nespresso Vertuo drip tray IS REQUIRED for this print to…
Replacement capsule container insert for Nespresso Vertuo Next. Fits perfectly into the original capsule container.
The original model was too big for my build plate. Chopped it in half with a dove tail joint to put back together.
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
Vertuo Pod Recycler Place the pod on the lower part and press the upper part hard down until it bottoms out. This will push the grounds into the container. Remove pod and recycle each part as alu/plastic/food. Print Orient like this:…
This is to be mounted on the kitchen cabinet door with double-sided tape. I use it to temporarily store empty pods before I send them back to Nespresso for recycling. Printed in abs on a core one, with .8 wall width in vase mode. Hugs the…
2" riser for the Vertuo Next coffee machine
I needed to store Nespresso Vertuo coffee pods on the inside of a kitchen cabinet door. I spent days trying different designs before ending up with this solution, which has the following benefits: Holds a full box of 10 pods up to Mug…
This is my remix of the original Nespresso Vertuo Turntable Tower model . 🔧 What’s been changed? Each slot has been redesigned to hold exactly 10 Vertuo capsules This allows you to store one full box of Vertuo pods per slot The tower now…
The stock Nespresso Vertuo cup rest is small, and larger mugs tend to shift when the machine vibrates during brewing. This snap-in platform replaces the original metal rest with a wider, more stable surface that makes using oversized cups…
Save time and make clean-up easy with this DeLonghi Nespresso insert. The insert can be used as provided as a stencil to shape paper towels for the drip tray. The template also stores inside the tray for future use. Folding a single paper…
Simple print, supports recommended, any non-soft filament (mine shown is a gold PLA). I would recommend opening the non-perforated end of the nespresso sleeve and removing the excess cardboard before insertion (you can do the perforated…
Additional middle holder to chain multiple holder together
Vertical dispenser for Nespresso Vertuo pods, using original boxes
This waste bucket was designed for the Nespresso Vertuo Pop machine, and is able to hold much more capsules than the original one without overflowing, thanks to the higher walls. This print does not include the inner drip tray and can be…
This vertuo cup holder help you to refill Nespresso Vertuo capsule. Yous can buy " Aluminum Lids for capsules pods " Available at AliExpress or other inline resaler. You can use the upper section to press the lid on the capsule to get…
This model is a set of functional, 3D-printable tools designed to make reloading Nespresso Vertuo pods easy, clean, and repeatable. By using freshly ground coffee and a quality grinder, these tools let you refill Vertuo pods for a…
I accidently threw out my Nespresso waste bin so I thought I'd design one and share.
If you have a Nespresso Vertuo Pop+ and the cup holder is obstructed, this model will raise the machine up 38mm. Rubber feet are recommended to prevent the stand from moving around. This variety pack comes in handy for projects like this…
The internal factory spent pod container isn't very big and you often don't realize it's full until the pods back up or get crushed when you try to close the lid. The external container holds a lot more pods and you can see how full it is…
Just print at the same settings as the main model as mentioned and use the inlays to use with other cups sizes. I made one for 150ml and 40ml cups from the vertuo series. Happy printing! Daniel
Each base holds 3x drawers and are stackable. Supports between drawers are designed to allow items (such as the Aeroccino milk frother) to be placed on top without impact the drawers' freedom of motion. Vertuo drawers can hold…
Drawer organizers that hold your vertuo pods. I printed these standing vertically using supports in the slits. You maybe don't need supports but I used a metal pick to remove the supports inside of the cuts which worked fine. I'd add the…
Extended drainer plate for Nespresso Vertuo Coffee machine. If you require to use large cups or jugs. This was primarily a Fusion 360 CAD exercise to implement Lofts and Patterns but somebody might find it useful. The lid is a bit of a…
Wall\ Wall Cabinet bracket for Nespresso Vertuo coffee capsules. The bracket was originally conceived for our Siematic Kitchen cupboards which have a shelf hook system inset into the door inner, hence, the corner eyelets in the model. The…
Top part replacement for the drip tray.
☕ The Ultimate "Perfect-Fit" Vertuo Drawer Organizer ☕ The smartest, most adaptive pod system on the planet! Are you tired of "universal" organizers that leave awkward gaps in your drawer, making your coffee pods slide around? 😫 Or have…
This is a stand for the Nespresso Vertuo Machine. I'll upload a picture soon, just waiting for the paint to dry. I rotated it around the x axis to print it flat. We had an issue with the machine not being tall enough to put travel mugs…
WARNING: Without modification, this pod holder is not free standing, as it is designed to fit snugly under the side panel of the machine. The pictured print is in white Bambu PLA Basic printed on a P1S with a 0.4mm nozzle. The 3mf file…
these dispsencers are made for Nespresso's Verto pods/capsules. Made for any sizes of pods
Nespresso Vertuo Pod holder/rails. They are keyed to connect together. Can be mounted vertically or horizontally. The image shown is horizontally mounted on the underside of a wall cabinet - hidden from view. Pods are easily slid in and…
For mount under shelf storage system. 2022-05-08 Added splitted model to two parts for smaller printers. To join you can use pieces of filaments for align and stronger join and of course some glue. For mount under shelf storage system.…
I got a first-gen Nespresso machine eons back and immediately printed out some dispensers for the pods. In fact, these were some of my earlierst prints and the first functional prints allowed in the public spaces of the house. So when I…
Just a bit longer on the one side to accommodate massssssive Yeti mugs but full credit to Miguel M. for a perfect file.
Based on the original, put this together for the Vertuo pods included the gcode file made with PrusaSlicer 2.5.0 Beta1 - Much better finish up to 4.7mm is printed at 0.25, the top layers 0.15 Printed using Prusament Galaxy Black, textured…
Modifiable plate that replaces Nespresso Vertuo Next mug plate. You can modify your own in your preferred editor, change printing parameters for no top/bottom layers for awesome looks with prusaslicer etc. Fits perfectly, better than the…
Dispenser for Nespresso VertuoLine Capsules. It is mounted with three velcro command strips on the back of the bracket. There is a hole at the bottom because sometimes a pod can land upside down, and it would be hard to get out otherwise.…
Tool to assist with recycling Nespresso Vertuo Capsules/Pods at home. Uses readily available 9mm snap off blades (Example: https://www.screwfix.com/p/9mm-snap-off-knife-blades-10-pack/6344v) Optional push fit top piece relies on a…
I was looking to store pods for our nespresso machine in a couple of drawers so this is what I came up with. The orange prints were what I started with and I thought it would be nice to add another stack at one of the ends so I made an…
The Nespresso coffee maker I have isn't tall enough for my larger coffee travel cups to fit underneath, so this riser lifts the coffee maker enough to make them fit. Included two versions of the model, one in a single piece if you have a…
The water tank lid for our Nespresso Vertuo coffee maker got lost while moving house, so this was the perfect excuse to take a break from moving furniture around. I modelled a new lid in Fusion 360 and printed this on my Ender 3v2. I used…
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
Print just the tower part if you want, or if you want rotation, print the two turntable parts also. It uses a 608 bearing. The towers on the original one felt a little flimsy so I added some more structure between them that should fix the…
Vertuo caspule pack holder This is a capsule holder for the packages of the vertuo caspule type, since their package size change depending on the type, only colombia and diavolito are supported atm, feel free to add your favourite ones…
I created a stand for a Areolatte milk frother that attaches nicely to the Nespresso Vertuo Next coffee maker base, it keeps the frother handy but out of the way
Hello, 1° and 2° column is for 40ml(espresso) the 3° is for 80ml(double espresso) 4 X M3 3mm or max M3 6mm 2 bracket t
![Vertuo [empty] pods stacker](https://media.printables.com/media/prints/0fe24a44-0a35-436f-abd5-49cb97ccc87c/images/10878282_05645f81-2b48-473b-af4f-e96bfcb0f277_b860ea38-4eec-4e63-8ed8-7db7ac5ef62e/20251012_080727119.jpg)
