1 / 3
Water tank lid for Krups Nespresso Vertuo — zdjęcie 1
1 / 3

Water tank lid for Krups Nespresso Vertuo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement water tank lid for a Krups Nespresso Vertuo (model XN903) machine.

Ocena
0 / 5
Polubienia
3
Pobrania
114
Wydruki
1
Wyświetlenia
760
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

The water tank lid for our Nespresso Vertuo coffee maker got lost while moving house, so this was the perfect excuse to take a break from moving furniture around. 

I modelled a new lid in Fusion 360 and printed this on my Ender 3v2. 

I used the following settings, which I suspect were default slicer settings for standard quality:

  • 0.2 layer height 
  • 20% infill
  • 2 walls
  • 4 top and bottom layers (probably excessive)

I printed this is standard black PLA and it fits our tank perfectly. 

Seems like an obvious thing to say, but make sure to print it upside down to remove any need for supports and maximise bed adhesion.

The lid measures:

  • 15.2mm high
  • 88.2mm largest diameter
  • 81.95mm outside diameter of the bit that fits inside the tank

Tagi