Water tank lid for Krups Nespresso Vertuo
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.02 – €2.47 net (excluding VAT)
For file: NespressoLid_2h21m_0.20mm_205C_PLA_ENDER3V2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.24 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 2.34 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement water tank lid for a Krups Nespresso Vertuo (model XN903) machine.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 114
- Makes
- 1
- Views
- 760
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The water tank lid for our Nespresso Vertuo coffee maker got lost while moving house, so this was the perfect excuse to take a break from moving furniture around.
I modelled a new lid in Fusion 360 and printed this on my Ender 3v2.
I used the following settings, which I suspect were default slicer settings for standard quality:
- 0.2 layer height
- 20% infill
- 2 walls
- 4 top and bottom layers (probably excessive)
I printed this is standard black PLA and it fits our tank perfectly.
Seems like an obvious thing to say, but make sure to print it upside down to remove any need for supports and maximise bed adhesion.
The lid measures:
- 15.2mm high
- 88.2mm largest diameter
- 81.95mm outside diameter of the bit that fits inside the tank