Ikea NANNARP and BESTA leg holders for SuperSliders Furniture Sliders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to be able to place Super Sliders underneath my IKEA BESTA TV unit to be able to pullit away from the wall…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I made this to be able to place Super Sliders underneath my IKEA BESTA TV unit to be able to pullit away from the wall easily for claening, but to cover up the ugly sliders a bit and spread the weight more evenly.
UPDATE V2 models have deeper pockets for the feet and now have a 'skirt' that come down around the super sliders to reduce the risk of slipping off when moving.
Link to the supersliders:https://www.amazon.ca/gp/product/B07R2FCWXK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Link to IKEA NANNARP legs:https://www.ikea.com/ca/en/p/nannarp-leg-black-10293597/
Link to IKEA BESTA Support leg:https://www.ikea.com/ca/en/p/besta-supporting-leg-gray-50293604/
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
15%
Notes:
I added extra top and bottom layers but really it should be fine on stock settingsrnrnPrinted out of PETG as the sun hits them through my sliding door in my living room and that's what I had on hand. PLA would most likely be fine
Category: Household