1 / 4
Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head) — zdjęcie 1
1 / 4

Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head) Tired of bolts loosening up and legs becoming loose.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
1
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head)

Tired of bolts loosening up and legs becoming loose. If you have similar chairs you know what I mean.

I would have safety wired the bolts if the heads were cross drilled.

Instead I came up with this retainer / capture plate to keep the heads from rotating and loosening up.

Retainer plate can be screwed in place or glued.

Printed with 3D Fuel Tough PRO PLA +.

Print Settings

3 base layers

3 top layers

6 vertical layers

30% Gyroid infill

Print bed temp - 60 deg C

Print Nozzle temp - 230 deg C

Tagi