Ultra Lightweight 18650 6S Battery Holder for RC Jets & Drones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight 6S 18650 holder for high performance RC jets, drones and compact high voltage packs.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
🔋 Ultra Lightweight 18650 6S Battery Holder
This 6S 18650 holder was designed specifically for high performance applications where weight and rigidity matter:
• RC EDF jets
• Long range FPV aircraft
• High voltage drone builds
• Robotics platforms
• Custom lightweight battery packs
The layout keeps cells aligned and secured while minimizing unnecessary plastic mass.
✈ Designed for Flight Applications
In aircraft builds, every gram counts.
This holder:
Reduces overall pack weight
Maintains strong cell alignment during high G maneuvers
Allows airflow between cells for improved cooling
Keeps pack dimensions tight and compact
Perfect for 6S1P or as a base structure for 6S2P builds.
Works great with high discharge cells like:
Molicel, EVE, Tenpower, Ampace and similar 18650 high current cells.
🖨 Recommended Print Settings
Material:
ABS (best for aircraft)
ASA
PETG
Layer Height:
0.2mm
Walls:
3 perimeters minimum
Infill:
20–30%
No supports required.
For extreme vibration setups, increase infill to 40%.
🔧 Builder Notes
For high current builds:
Use proper nickel or copper busbars
Spot weld only
Avoid soldering directly to cells
Designed by DIY500AMP.
If you print one and install it in a jet, share your build.