Barn style birdhouse 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Birdhouse in the shape of a barn
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Birdhouse in the shape of a barn.
I printed it in PETG with 2 walls and 5 to 10% infill depending on the part.
The mounting plate has holes for screws or recesses for straps.
After the roofs of my first houses flew away a couple of times I made an option to attach the roof with m3x15mm bolts. If you want to do this you need 4 times a M3x15mm bolt and 4 M3 nuts.
The main body is compatible with the roof of Barn style birdhouse 1
The same for roof connector 2 needs to be printed 2 times normal and 2 times mirrored.
Bottom strip needs to be printed 4x, Edge2 2x, Roofedge2 2x
There is a ring with 28mm and one with 32mm provided for common tits and great tits respectively.
Bottom edges and gate were glued to the body with cyano.
Facade, roof, roofedges, edges and roofconnectors were also cyanoed together.
Enjoy