Core One (un)Original Drybox Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a top mount for the (un)Original Drybox on the Core One inspired by the Fixation mount for the prusa enclosure.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Wanted to keep using the (un)original drybox with the auto rewind on my core one until the INDX is out. Printed modified mounts that attach to the top sides of the Core One using six M3-35's and six M3nN (locknuts).
The model will just fit on the Core One bed if placed on a diagonal. Printed with 15% infill, gyroid. Included already positioned .3mf as well.
This design could be improved by remixing the mounts to use heat press inserts and insert the screw from the other side. You'd get away with a much shorter screw as well.