Linkle Figurine - Heroic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Linkle from the Zelda series in a heroic pose.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Description
Another Linkle figurine, this one in a heroic pose with no weapons. The prints shown were made with a Core One with the settings below at 150mm height (100% model size), printed in dual color PLA.
If anyone prints this with a resin printer, please upload an image here, I'd love to see it.
Settings Checklist
For successful printing, I recommend using the included .3mf file or replicating these settings:
Orientation: Leaning backwards 45'. This worked well for my other Linkle figuring, so I replicated it here.
Layer Height: 0.15mm fixed.
Profile: Structural.
Nozzle: 0.4mm.
Perimeters: 3.
Infill: 15% Gyroid).
Supports: Organic Style (enable "Structural" branches), Everywhere.
XY Separation: 80%.
Top Contact Z Distance: 0.22mm.
Bridges: Set Bridge Flow Ratio to 0.95.
The pictures were taken at the default 150mm height, but it should print fine at other sizes.
Printer-Specific Notes
Prusa Core One / MK4: I used Stealth Mode to slow down the printing process. The standard "High Flow" jerk/acceleration caused the tall organic supports to shake and eventually break free on my other Linkle figurine. Stealth mode resolved this issue.