1 / 2
JBL BAR 1300 Satellite Speaker Magnetic Covers — zdjęcie 1
1 / 2

JBL BAR 1300 Satellite Speaker Magnetic Covers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnet covers which close off the open face of the rear satellite speakers when they are detached, polishing the look.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Uses QTY-4 12x5x2 magnets in each cover to attach to each speaker. Use smaller magnets if required.

Important Tips:

  • Flip magnet orientation on 1 of the parts as the covers are speaker dependent. One requires the magnets to all be North Down and the other requires South Down. Alternatively, you can use a piece of ferromagnetic metal in each location.

  • Lower bed temps to 80 degC max as the heat will demagnetize the magnets. I used 72degC.

  • Keep the purge object as the print pause causes oozing and without it there will be part defects. 

Speaker Attachment:

  • If you made it this far you clearly want to improve your setup. Consider using M4x12mm knurled thumb screws to attach the speakers if you frequently dock/undock them.

Tagi