Competitive Table Tennis Racket | Ping Pong Paddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Your personal ping pong paddle in official size and weight. Sandwich construction. Different shapes. Weatherproof.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Table tennis racket/Ping pong paddle
Build your personal weatherproof table tennis racket for the garden or playground. It consists of a core layer (e.g., PLA) for stability and coatings (soft TPU) for ball control and grip. Available in classic and hexagonal shape. The paddle can compete with entry-level commercial models and costs about €5 in materials. There is potential for individual tuning (softness or honeycomb surface / see title photo).
I used 3M double-sided adhesive film for glueing the layers together what works well and is easy to do. Superglue may work too.
Printing
1 x Core - PLA, PETG or better material - 20 % infill - 2 top/botton layers
2 x Sides - TPU 85A (or softer) - 20% gyroid infill - 2 top/botton layers
Adjust the softness with less or more infill and top layers
[Honeycomb-Version > print with 0 top layers and cubic infill]
Accessory
Super glue or double-sided adhesive film 25x25 cm (3M or other)
Assembly with adhessive film
Clean glue surfaces e.g. with your printbed cleaner
Glue adhessive foil on core part
Cut off overhanging edges with a utility knife
Glue on TPU side
Repeat steps with other side
It sticks better if you clamp it for a while.
Also check out the corresponding paddle stand with ball tray.
