LED Light Strip 45° Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED strip mount to clip a light strip in a 45° angle.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 247
- Wydruki
- 3
- Wyświetlenia
- 1470
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
LED strip mount to clip a light strip in a 45° angle.
I designed it for a Philips Hue Lightstrip to be mounted behind a cabinet.
The mount can be taped to an object, but in my case I decided to drill holes afterwards and mounted it with a nail. Small screws should also do fine. I suggest to modify the model in the slicer with your specific hole size.
Another variation is specifically designed to be hanged under a mirror, which had an angled profile on the back.
I printed this model with PLA and PETG with 0.2mm layer height and 100% infill. With PETG the clip is more flexible which makes the strip a bit easier to insert.