ZD-915 PCB to Capacitor Drainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to use the step down DC-DC converter PCB in your ZD-915 soldering station to drain capacitors.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently upgraded my ZD-915 de-soldering station. The little DC-DC converter PCB was left over. Instead of sending it to recycling, I soldered on 2 more resistors and modeled this little part so I can safely use it to drain capacitors such as those inside microwaves or mains Voltage power supplies.
The board fits snugly though you can use a drop of super glue in each corner to hold it down should you wish. Use 2 zip ties to hold the wire in place so it doesn't pull on the PCB pads.
0.2mm layer height
15% infill
8 outer walls (meaning it is completely solid), 3 bottom layers
PLA, PETG or ABS are all fine.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.
I built this project in this video: