ZD-915 PCB to Capacitor Drainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to use the step down DC-DC converter PCB in your ZD-915 soldering station to drain capacitors.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently upgraded my ZD-915 de-soldering station. The little DC-DC converter PCB was left over. Instead of sending it to recycling, I soldered on 2 more resistors and modeled this little part so I can safely use it to drain capacitors such as those inside microwaves or mains Voltage power supplies.
The board fits snugly though you can use a drop of super glue in each corner to hold it down should you wish. Use 2 zip ties to hold the wire in place so it doesn't pull on the PCB pads.
0.2mm layer height
15% infill
8 outer walls (meaning it is completely solid), 3 bottom layers
PLA, PETG or ABS are all fine.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.
I built this project in this video: