Gen2 Scion xB Replacement Door Speaker Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the integrated OEM speaker+mount.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The OEM speaker is integrated into its own bracket, so upon removal a new bracket is required for the replacement speaker. Has 7 tabs for drilling new mounting holes that won't interefere with the drilled out riviets from the factory speaker. Model is complete with a gasket that can be printed in a soft TPU (or Silicone if you've got that fancy mod for the Prusa XL) and a passthrough for wiring up the new speaker.
Recommended print settings
Bracket
Heat resistant filament (PETG minimum)
5 walls
1.4mm top/bottom layers
25% infill
Standard Supports (painted onto the bottom of the mounting flange)
0-gap support interface with contrasting filament
Gasket
Slow speeds for best bonding of TPU
2-3 perimeters
No infill is needed as the gasket is only 1mm thick
Have fun and let the beat go on!