Gen2 Scion xB Replacement Door Speaker Mounting Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the integrated OEM speaker+mount.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 38
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The OEM speaker is integrated into its own bracket, so upon removal a new bracket is required for the replacement speaker. Has 7 tabs for drilling new mounting holes that won't interefere with the drilled out riviets from the factory speaker. Model is complete with a gasket that can be printed in a soft TPU (or Silicone if you've got that fancy mod for the Prusa XL) and a passthrough for wiring up the new speaker.
Recommended print settings
Bracket
Heat resistant filament (PETG minimum)
5 walls
1.4mm top/bottom layers
25% infill
Standard Supports (painted onto the bottom of the mounting flange)
0-gap support interface with contrasting filament
Gasket
Slow speeds for best bonding of TPU
2-3 perimeters
No infill is needed as the gasket is only 1mm thick
Have fun and let the beat go on!