Counting matching models…
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
BoxBot B-01 is the first in a series of print-in-place robot figurines that fold up into cubes. The model features 10 3D printed hinges that operate 4 moveable legs and 2 cannons that fold out from the robot's main body. The print…
Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
Xbox Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
The Deep Calls... 🐙 A tentacle rises from the depths to safeguard your Playstation 5 controller. Functional, eerie, and impossible to ignore. Tentacles not your thing? How bout dem bones
*The file was exported in inches. If it shows up tiny in your slicer, scale it up 25.4x I bought two used xbox controllers that didn't have the battery covers on them, and none of the designs I found online fit very well, so I went ahead…
Designed for Xbox Series X and S Controllers. I think it's compatible other Xbox controllers except those that use a battery pack. Note: The Xbox logo may require sanding to get it in place. Or you can paint the logo hole.
Stable stand for Microsoft Xbox One/Series controller.
Rack and pinion steering for your xbox controller. 100 degrees of rotation. Enjoy finer control in racing games. Get the remastered version: https://www.printables.com/model/271330-xbox-one-mini-wheel-evolution What you need: 608 bearing,…
Simple, easy and quick to print (around a hour) mount. Not a perfect design, might revisit later but works fine. Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Resolution: 0.2…
Rack and pinion steering for your xbox series X [S] controller. 100 degrees of rotation. Enjoy finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
Thing files for Browns PlayStation Xbox Switch Controller Stand by brown1985 - Thingiverse
TEST FIT TEST FIT TEST FIT Head here for the full Xbox design PS4 Version Available Here PS5 Version Available Here Switch Version Available Here Print and test controller clips to make sure they fit. 4 files provided here: 1: STEP file…
scanned the xbox one controller using my Mole Scanner from 3DMakerPro
Battery Cover for Xbox Series S/X Controllers clicks in firmly printed in PLA i think this is the first "free" model of a normal battery cover for the xbox series controllers
It works like this: Two different versions are included. One for left-handed and one for right-handed gamers. Print the parts in PLA with regular 0.2 mm layer height settings. All parts can be printed without supports. (the A button has a…
This model is inspired by this simple holder: https://www.thingiverse.com/thing:716092 But because most of Xbox players have at least two controllers at home, the original model has been modified to a double holder for two controllers.…
Replacement battery cover for Xbox Series X/S controllers. I printed using PLA on the Prusa i3 MK3 and couldn't be happier with the results! After testing the first version, which is as close to an exact replica to the original part as…
A small modification of the bearing-less mini wheel by mrplasma ( https://www.thingiverse.com/thing:4498704 ) which is based on the pixel2 design ( https://www.thingiverse.com/thing:3049220 ). Details I noticed that in the original design…
Foxbat is GIANT handcannon Nerf pistol, which uses Talon or Angled Talon half-dart magazines, loaded through the grip! Blaster Overview: Firing Demo: READ THE "Print Info" SECTION of this description page before printing the blaster!…
I needed a solution to mount an Xbox on a wall. Something that would be secure, allow good airflow, and look good too. It's a tight fit and the power cord locks the xbox in place. All ports and buttons are accessible. The bottom has holes…
This is Xbox controller stand made from PLA. NO SUPPORTS ARE NEEDED!!!
Xbox Controller - 3D Scan Use to Create your own custom Controller Stand
This is a no support print, there are custom supports included in the model. If the model doesn't fit on your controller than you should try printing at 105%. They will need a little bit of force to get on but for the most part work great.
Use to mount your XBOX X/S controller to your wall or your race rig. Holes are sized for two M8 bolts or just use zip ties.
I made this model because I’m really pretty picky with the type of paper I use for my notebooks and sketchbooks so I made the Hexbook one with interchangeable paper. no print support needed. Print the cover 2x, spine 1x, clip 4x. The…
Your favorite test cube and your favorite cubic foldable robot in a print-in-place, beautiful package! I can’t tell if you’ll be more frightened of the QB-01 robot, or if it will be more frightened of you. However, you can find out by…
Xbox controller stand with cutouts for the paddles on the back. Best fits the elite series 2, but because of the slightly different shape from the series controller originally used by the OP, it's not a perfect fit. Original elite…
****** Make sure to check out the entire clamp and rail system lineup!!****** https://www.thingiverse.com/hardline23/collections/clamp-on-rail-system Welcome to my SECOND released project for Thingiverse! I normally do more industrial…
Desk space is premium real estate. Hang it instead !!! I did not need support but your mileage may vary. Uses the T-Clip system. The default one might not fit all Skadis board, but the Fusion 360 file is available here:…
I followed the instructions that npiegdon laid out for his excellent Nintendo Switch Pro Controller Stand to make something similar for Xbox 360 Controllers.
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Someone requested an xbox controller version of a phone mount I made for the Stadia controller (thing:4008153) so here it is. Confirmed that it does work with an elite series 1 and series 2 controller with paddles (special thanks to…
xBloom Studio storage for xBloom Filters, omni dripper 2, and xPod Dock. I was looking for a compact storage solution for all my xBloom attachments. I wanted it to be able to mount to the machine itself as I was using a rolling base and…
einen hier gefundenen Xbox Controller halter nach konstruiert und diesen für Zwei Controller gefertigt
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
There weren't many controller stands I liked here on Thingiverse. The ones I found were simply a U shaped stand that just held the controller. This stand was custom made and fitted to an Xbox One controller, so the stand essentially wraps…
For Xbox 360 Slim and Xbox 360 E. -all screw holes had 1 centimeter diameter counterbore, should support most generic PC HDD screws -holes for a pull tab, use scotch tape. -thick pry hole for when the pull tab was unusable/broken, use a…
An Xbox One controller holder for IKEA's SKADIS pegboard. Print on it's side with supports enabled. Step file included if you would like to modify it.
Digital 3D model of Beauxbatons Academy of Magic wand (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. We designed the wand based on different motives reminding the French wizarding school of…
Remix BoxBot B-01 into keychain for everyone that want their keys guard by this cute robot. I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Xbox controller stand for Xbox Series X.
Beautiful display piece that acts as a stand for Xbox Series Controllers. Printed with organic supports and 8% infill. The upper teeth are very fragile, I broke one off while removing the supports. Adds character though ;). Printed with…
Adapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.…
Looking to upgrade the storage in your OG Xbox to a SSD or other 2.5 inch drive and want to securely hold it in place? Look no further than this 2.5 inch to 3.5 inch adapter that was custom designed specifically for the original Xbox.…
Xbox One game case holder that fits 12 game cases.
Please note! Xbox one and series controllers use slightly different battery covers Please make sure to choose the right one! Using the wrong one can end up with the tabs breaking in your controller (which shouldn't be dangerous but will…
THX @qgepbiz for the original, which inspired me for this remix Minimalistic Xbox Controller Stand von agepbiz | Kostenloses STL-Modell herunterladen | Printables.com Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip…
Hi everyone! I have designed some mounts for the Xbox One, Nintendo Switch (Pro controller), and Playstation 4 controllers. These can attach to the wall via command strips or screws, it's up to you. I uploaded a model for the Xbox One /…
This remix just adds a logo to the front of the stand. Probably going to need to scale down the logo to fit. Resizing the logo down to 95% in the slicer gave me the best fit in the holes, but I did need to glue them in.
Simple and clean looking Xbox Controller Stand. Fits 8x3mm anti slip rubber pads (optional) Printsett 0,1-0,2mm layer height
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Xbox One controller holder for use with IKEA Skadis pegboard now updated to have…
I was lucky enough to get an xbox Series X at launch but like most TV stands mine has shelves that don’t accommodate the console standing in its natural position. I didn’t want to sit it on the floor hoovering up dust, so designed and 3D…
Video Game Stands (PS1,PS2,PS3,PS4,PS5,PSP,XBC,XBO) by nibor_repmek - Thingiverse
Keyhole and flat back versions available, as well as with and without logo. For best strength and quality, print sideways. Elite Series 2 (Coming soon, premium) Dualshock PS4 Dualsense PS5
I'm fine with the shorter paddles, but always accidentally knock the long ones. I wanted something to use them to capture video, so made these stubby back paddles for infrequent use. Should work with the Series 1 or 2. Print Settings…
I've designed a minimalistic Xbox Controller Stand for the IKEA SKÅDIS pegboard Subscribe or follow me on: Instagram: https://www.instagram.com/agepbiz/ YouTube: https://www.youtube.com/user/agepbiz Twitter: https://twitter.com/agepbiz
I designed this GPU fan adapter plate for the original XBox to allow you to use a 40mm fan instead of the loud and proprietary original fan. This will only work on the 1.0 version of the original XBox. If your XBox is a later model and…
Additional paddles for the standard Xbox One controller. They transfer the bumpers (RB/LB) to the bottom of the controller and enable you to use the middle fingers for quick and easy action. They also enable you to reach the opposite…
Tired of the plain look of the XBox Series S? Try this case, the Voronoi pattern gives it an organic look and it's bound to catch the eye. It wraps perfectly around the top fan cutout and does not restrict airflow to the sides of the…
Sticks to put on your Xbox controller to make it feel more like a drone controller.
The OG Xbox is a big chonker. Save some space and stand it upright. Bottom of stand has vent cutouts so the Xbox case can still breathe. I recommend placing rubber feet on the bottom of it to maintain air flow and so it won't slide around.
XBOX Controller Stand This sleek and functional stand is designed to perfectly cradle your game controller, keeping your gaming area tidy and your controller readily accessible. Key Features Custom Fit: Precision-engineered to hold your…
End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515 Zkrácená verze na 6cm pro sluchátka Print instructions Category: Audio Summary End Caps for Open V-Slot 2020 with Open…
The four year old design has been remastered for greater driving precision, faster printing and 97% less support material. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have…
Scanned a fancy rock, and cut out the shape of the controller using a scan of the controller.
Stable controller stand (Xbox 360, Xbox One, Xbox Series controller)
A good friend of me needed a Controller and Headset holder for her new Xbox oneX. I searched but didnt find one that looks good for me. So i opend Fusion360 and did it myself. I used the Controller stand from agepbiz…
The Nexus 70mm fan seems to be a pretty common cooling upgrade for the original Xbox. The stock fan is a proprietary 72-ish mm job that has a specific shape and these tabs that secure it into the back of the console. However there is no…
A very sturdy and clean design i made of a holder that clips on to my Xbox Series X to hold the Controller and Headset. The X infill is a seperate file and can (ofcause) be printed in various colors to match your style. You might have to…
Screw mounted holder for 2x Video game controllers. Works with Xbox 360, Xbox One, Xbox Series X/S, PS3, PS4, PS5. Purchase it here :) https://www.etsy.com/listing/1768995799/double-controller-holder-for-xbox-ps5
Made a remix of some popular prints to meet my need to store my controllers on HSW. By no mean I design these, juste cut ( to make it work, and make it smaller ) and fusion two items together to work … Made a remix of…
Hollowed out and stylized version of an xbox controller stand
i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…
Logitech G923 Xbox F1 wheel
Stand for two Xbox One controllers with logo.
There are many game console controller models available. I wanted a horizontal stand that could fit easily into a drawer, but also fit multiple controllers. I remixed io_roboto 's original controller stand using Fusion 360 to fit 4…
Made these feet to give the XBox some breathing room when it is on its side. I made two sizes. 8mm and 16mm. There is only one foot to print. Pick the size you want. Either 8mm or 12mm tall. Then you will print 2 and then 2 mirrored. A…
This is a remix (of sorts) of one of my own designs, the Nexus 70mm fan mount for the original Xbox. The Nexus 70mm fan works quite well in the original Xbox, however I've had folks ask me about using the Noctua 60mm fan instead. This is…
This is a 60mm Noctua fan mount adapter for the Original Xbox. It was created to replicate the look and feel of the original Xbox fan (there are a few different fan models, but this one is based off of the Nidec fan). Improved airflow was…
Xbox controller Wall Mount on 2x screw
xbox controller wall mount
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required.
Print the letters with horizontal expansion 0,28mm for the best fit. No glue should be required, but its recommended for a good hold.
ETSY Enhance your ROG Ally gaming experience with this Xbox-style grip designed for the Z1E model. This ergonomic accessory improves comfort during long gaming sessions by providing a familiar controller feel. Perfect for handheld gamers…
Not printed, straight scan no clean up or smoothing, literally as it came from the scanner. just for reference to see what the scanner is like. Category: Scans & Replicas
A Holder for the Xbox Controller for the Skadis pegboard. The 2 Hooks slot into to 2 parallel holes on the Ikea Skadis and hold the controller securely.
English: The Xbox Series X Controller and Headset Holder allows you to securely and conveniently store your Xbox Series X controller and headset near your console. This holder has been specifically designed for 3D printing and is easy to…
Xbox SERIES controller battery cover
Custom Xbox One Controller Face Plate
Stand supports both: 8Bitdo Ultimate 2C and XBOX Series Controller
A stand for the Xbox One (and Xbox Series X|S) controller in the style of @npiegdon's stand. Figured that I'd fill out the missing member of the trio: Nintendo Switch Pro Controller Stand Sony PS4 Controller Stand I used Laser Design's 3D…
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
My desk was feeling cluttered, so I decided to make some brackets to mount my Xbox Series S console under my desk. The design is pretty simple, with a bracket for each side of the console. It allows for airflow around the console as well…
The Controller Couch is a modular controller stand for XBox Series X controllers. It securely displays 1 to 4 (or more!) XSX gamepads. It features a finger well to easily move the stand, as well as a user-selectable accent color behind…
![Xbox series X [S] controller mini wheel](https://media.printables.com/media/prints/157078/images/1468543_a9941f77-2739-4f1c-a938-4d727942ca80/large_display_xs_wheel_fs_start_157078.jpg)
