Voronoi Case for XBox Series S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable Voronoi Case for XBox Series S
- Rating
- 4.5 / 5
- Likes
- 244
- Downloads
- 1,422
- Makes
- 3
- Views
- 6,418
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of the plain look of the XBox Series S? Try this case, the Voronoi pattern gives it an organic look and it's bound to catch the eye. It wraps perfectly around the top fan cutout and does not restrict airflow to the sides of the console. Obviously there is space for the XBox logo and the USB-Port plus pairing button on the bottom left.
Unfortunately my Prusa MK3 is not large enough to print the entire case, so I designed two separate models, that can be glued together. If your printebed is large enough feel free to print the UniBody version.
All versions print very nice with a standard 0.4mm nozzle, but a maximum layer height of 0.2mm is recommended to get the curved surfaces right. I used variable layer height and it provided a much better compromise between quality and print time, so make sure to check it out. Regardless of your print orientation you will need lots of support. A brim is necessary as well; the contact area with the printbed is minimal in any orientation.