3D Chameleon Auto Clippy For Neptune 4 with Beacon/Carto support and more
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of KA009 version, but with Beacon/Carto support
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
print as described in SilencedFrost version + add support for servo holder pillar
cover for screw
pillar cosmetic fixes
quick/dirty remixes of autoclippy servo holder (ECAS04 and UBBI versions)
autoclippy support leg for better front screw alignment
servo holder - put M3x6mm screw under blade holder from side
servo holder - most of holes made easily printable
(except two with thin wall around)servo holder - use M3 OD4.5 L4 heat-inserts. Alternatively you can drill 4.5mm hole and glue them in to avoid thin wall damage.
added blade holder with tighter fit (blade width 8.5mm, thickness 0.45mm)
added Servo_arm model. Print with 6 perimeters, 100% infill. Durability not tested yet!!
more modifications may to come
Print oriented as is with organic tree supports... you can check screenshot
... work in progress ;-)
EDIT: 18.3.2026 - added model of "Servo_arm".
EDIT: 20.3.2026 - "Servo_arm" replaced with optimized design, preparing "howto set-up"
EDIT: 22.3.2026 - cutter_servo_v0.9.pdf guide
EDIT: 23.3.2026 - new "Servo_arm" with better angle setup and different screw type holes + cutter_servo_v1.0.pdf guide
EDIT: 29.3.2026 - added V2, do not use V1 with printed arm (obsolete)