3D Chameleon Auto Clippy For Neptune 4 with Beacon/Carto support and more
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
remix of KA009 version, but with Beacon/Carto support
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
print as described in SilencedFrost version + add support for servo holder pillar
cover for screw
pillar cosmetic fixes
quick/dirty remixes of autoclippy servo holder (ECAS04 and UBBI versions)
autoclippy support leg for better front screw alignment
servo holder - put M3x6mm screw under blade holder from side
servo holder - most of holes made easily printable
(except two with thin wall around)servo holder - use M3 OD4.5 L4 heat-inserts. Alternatively you can drill 4.5mm hole and glue them in to avoid thin wall damage.
added blade holder with tighter fit (blade width 8.5mm, thickness 0.45mm)
added Servo_arm model. Print with 6 perimeters, 100% infill. Durability not tested yet!!
more modifications may to come
Print oriented as is with organic tree supports... you can check screenshot
... work in progress ;-)
EDIT: 18.3.2026 - added model of "Servo_arm".
EDIT: 20.3.2026 - "Servo_arm" replaced with optimized design, preparing "howto set-up"
EDIT: 22.3.2026 - cutter_servo_v0.9.pdf guide
EDIT: 23.3.2026 - new "Servo_arm" with better angle setup and different screw type holes + cutter_servo_v1.0.pdf guide
EDIT: 29.3.2026 - added V2, do not use V1 with printed arm (obsolete)