Door sensor tilt mod 433mhz
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the Wyze Garage Door Bracket. Really great idea scrolled by it several times thinking it had to fit over a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Inspired by the Wyze Garage Door Bracket. Really great idea scrolled by it several times thinking it had to fit over a hinge when all it needed was gravity.
This is made to fit the 433mhz door sensor GS-WDS07 https://community.openmqttgateway.com/t/gs-wds07-433mhz-door-sensor-with-open-close-status/301
It was a quick redesign so the magnet portion isn't as tight as I prefer and will need the double sided foam tape to stick in place.
I used two zip ties to hold it in place, one along the top to secure the "hinge" and a second closer to the magnet.
For reference:
Sensor
76x28.5x15mm LWH
Magnet
43x12.7x12.5mm LWH
Print Settings
Rafts:
No
Supports:
No
Resolution:
.3
Category: DIY