Door sensor tilt mod 433mhz
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by the Wyze Garage Door Bracket. Really great idea scrolled by it several times thinking it had to fit over a…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Inspired by the Wyze Garage Door Bracket. Really great idea scrolled by it several times thinking it had to fit over a hinge when all it needed was gravity.
This is made to fit the 433mhz door sensor GS-WDS07 https://community.openmqttgateway.com/t/gs-wds07-433mhz-door-sensor-with-open-close-status/301
It was a quick redesign so the magnet portion isn't as tight as I prefer and will need the double sided foam tape to stick in place.
I used two zip ties to hold it in place, one along the top to secure the "hinge" and a second closer to the magnet.
For reference:
Sensor
76x28.5x15mm LWH
Magnet
43x12.7x12.5mm LWH
Print Settings
Rafts:
No
Supports:
No
Resolution:
.3
Category: DIY