SMRRF Name Badge - Floating Hexagon Mesh Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This name badge for SMRRF, with a slot for a Maker Chip, requires it to be printed with a mesh fabric
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The original modular name badge was created by @kyle_gb, @alexandertmoss, and @hartk on the Voron Design Discord! It is designed to be modular, and allow you to customize it, as well as has a slot for a maker chip to be shown off.
The name plates are retained in the badge with short sections of 1.75mm filament.
Make sure to pause the print halfway to insert a non-stretch mesh fabric to continue printing, else it will leave the hexagons on the buildplate. Remove the excess mesh with a soldering iron.