1 / 2
SMRRF Name Badge - Floating Hexagon Mesh Edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This name badge for SMRRF, with a slot for a Maker Chip, requires it to be printed with a mesh fabric
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
The original modular name badge was created by @kyle_gb, @alexandertmoss, and @hartk on the Voron Design Discord! It is designed to be modular, and allow you to customize it, as well as has a slot for a maker chip to be shown off.
The name plates are retained in the badge with short sections of 1.75mm filament.
Make sure to pause the print halfway to insert a non-stretch mesh fabric to continue printing, else it will leave the hexagons on the buildplate. Remove the excess mesh with a soldering iron.