377 models
A simple holder for an ID badge or card. Portrait orientation. Easy access to card while maintaining a secure hold. Print face up. Minimal supports needed. Enforcers painted onto underside of tabs.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Update 2024-11-17: After ~3 years of near daily use, it broke. I've made a few subtle updates to the model that should both strengthen the fracture point, and clean up a model a bit. I had used an older design daily for a year, before it…
Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant
Protect the tip of your pencils and keep your pouch clean! This cap is designed for 7 mm hexagonal pencils, but it also fits most circular pencils just fine. You can thread a lanyard through the eyelet and attach the pencil cap to your…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Designed to be compatible with Cherry MX style key switches. Just add one of those, a key cap, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only overhangs are inside the hole where the…
We're back with a chonkier, more balanced, even more fun fidget! Designed to be compatible with Cherry MX style key switches. Just add two of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but…
By special request, more keys, more fun! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The…
What's more fun then 4 keys? 9 keys! Designed to be compatible with Cherry MX style key switches. Just add 9 of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only…
Fun for keyboard fans and gamers! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only…
DJI Mini 3 - Mini 2 - Air 2 - Air2s Lanyard Mount It holds itself. You can leave it on the RC all the time. Version 2 This version for those who wants to fit controller to tight cases when the lanyard mount is already mounted. ( I…
What's more fun then 2 keys? Four keys! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The…
Simple paracord bead. Print with supports.
This is a remix of CosmicSubspace Simple Card Wallet: https://www.printables.com/model /297285-simple-card-wallet/remixes The cards can be inserted or pulled out without needing to touch the clips. Design is made for print in place, but…
Remixed @third-dimension-labs clean WASD keyswitch/cap fidget. Opened up the string hole so it can hold 3/32 paracord. Added a chamfer to the bottom edge. Add your own switches and caps. There are 3d printed caps on this site.
Made an iPhone 13 Mini Case with holes for a lanyard and some hex design in the back. Print laying on the back in TPU with supports. Once printed i suggest to make a cut underneath the buttons so they can be pressed more easily.…
This model was designed so I could replace the boring colour one I was given at work. Its designed to be printed in either ABS or PLA for rigidity and the overhangs should be printable on most printers (tested on Ender 3 and FF Adventurer…
Print Settings Printer brand: Creality Printer: Ender 3v2 Rafts: No Supports: No Resolution: 0.2 Infill: 7%
Mavic Mini Phone Holder with Lanyard Clips I remixed the phone holder from YohannG from scratch to suit my needs. Changes included: Added notches made specifically for the Mavic Mini controller Designed for very minimal support needed…
Hey a lanyard bead! Lanyards are a simple thing, but its the only thing I keep on my keyring, I mean I keep a swiss army knife on my keys as well. And if I didnt have keys I would put a lanyard on my swiss army knife. Everyone knows its…
Similar to https://www.amazon.com/SHANSHUI-Lanyard-Tether-Universal-Smartphones-Black/dp/B083158CBJ When importing STL swap the print face around as the tether hole is thicker by 1mm. I recommend printing with TPU, I used 95A eSun…
The original adapter to attach a lanyard to the mobile phone was broken. I designed a printable replacement. I started with a 0.6mm version, then made it 1mm in the stressed area. Use at own risk. Be careful with material selection and…
I made this as a nice case to hold my school ID (I took it out for the photo) that I'm required to wear every day. I made a vertical and horizontal that you can use based off personal preference. If the tolerance is too tight for your…
Print using 3 or more walls to give strength. This is designed to print quickly, provide a secure mount for a double lanyard and still allow access to the door.
Very simple print that holds the YubiKey securely along with a badge on the lanyard. Users of the previous clip provided feedback that some Yubikeys are slightly larger, and are not easy to remove. This model should work with all slightly…
3d Print you own paracord lanyard, Just add a M3 6mm bolt and a mini carabina Blog post - https://wp.me/pKY3w-D5
A simple adapter to add a lanyard to your phone using Quad Lock.
Covers to put your YubiKey 5 or 5C into when you can't leave it in your computer. Designed for attaching to a lanyard with a loop end or keychain. Design was inspired by the Thingiverse post, but CAD work was done by me in Fusion360 for…
Massive shoutout to the model used for inspiration! The measurements and primary design are from their model. I just felt some improvements could be made and did these How to print Print with regular supports and a support interface for…
A Lanyard or Medal Safety Clip This will take a 1 inch or 25mm wide ribbon. Pulling on the lanyard will result in the clip pulling apart so it doesn't get stuck. Once printed test the pushing together and pulling apart of the two pieces,…
Simple Toothpick with (or without) lanyard ring. Tool that fits in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Version with ring and without. Longer toothpick and short. Do not care about material, you…
Deutsch: Ich habe zwei Hüllen für das normale iPhone 13 entworfen, die MagSafe kompatibel sind. Beachte allerdings, dass die Hüllen 3mm dick sind und die Aussparung für MagSafe auf der Rückseite einen Durchmesser von 65mm hat. Entworfen…
A replacement bottom case for the Apple Airpod Pros with a lanyard loop large enough to accommodate 3mm diameter paracord. Designed to be a snug fit onto the Apple Airpod Pro charging case with a lanyard loop to prevent the case from…
Tent stake pusher compatible with MSR Groundhogs and Easton stakes. MrCitizen did all the work on this, but I wanted a way to attach it to my tent stake bag, so I added a hole. Printed with a little support for the center hole. I used PLA…
A simple card holder to hang from a lanyard. Easy access to card. No supports needed.
I designed this to be able to add a safety break away closure for lanyards, specifically, lanyards used around the neck. It's a quick connect, disconnecting closure which could be used on any small string. Just scale it up for larger…
Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
This is a case for the Heltec T114 V2 for you to dangle on a bag, backpack, or set of keys as a neat “charm”. It includes space for a GPS module, as well as a RAK PCB antenna or OEM coil antenna. Materials Required Heltec T114 V2 nEF52840…
Make your own lanyard with some ribbon and this hook/clip. Many can be printed in one go. I recommend PETG for these. PLA will probably wear out faster and may not be as springy but should also work.
In my previous job, I was required to wear a lanyard that held my employee badge. Lanyards are great for holding pens that have the metal clips. However, putting on/taking off can be tricky depending on the type of pen/clip tension. I…
See the model I remixed it from for details of how to use it I printed it on a Bambu X1C Bambu Lab PLA Basic (Mistletoe Green) 0.4 nozzle, 0.2 layer height 3 wall loops 20% Gyroid infill no support (the model has a built-in Break-Away…
To attach the braket to the controller you simply use two M4 x 8mm screws. I designed it so that the charging port is still accessible , but the “Host” and Micro SD ports unfortunatly aren't, because than it would've been way bulkier. And…
Replacement lanyard mount for Focus ST trunk cover. I imagine it should work for all focus hatchbacks. Found this model useful? Buy me some filament!…
This is a modified version of my other Spyderco Mule Team scales, with a hidden Lanyard hole and smooth, solid hex and outline hex surface texturing. These scales were designed around an S45VN blade, I'm not sure what the external…
I printed these on my Bambu Lab CX1 on Fine detail 0.12 mm layer height on the “silent” slow setting Hatchbox Glow PLA . They turned out great. I took some small paracord inner rope to make the small lanyard bit and some regular orange…
Mount for the DJI RC (e.g. for the DJI Mini 3 Pro) to snap in a double lanyard. Access to the USB C (charging) port is possible. To access the other ports (i.e. SD card) the mount would need to be removed, but this is possible within less…
Cascade Wallet V2 With Lanyard or Keychain Loop My sister needed a holder for her children's Yoto cards. This is the same great Cascade Wallet V2 by @Hugo with the simple twist of adding a small hole to hang it on a lanyard without…
If you want to hang your DJI RC-N1C controller around your neck, especially during longer flights or when you need your hands free, while doing some different things, I was inspired by some simple lanyard mounts available online (like…
This is a simple, robust and minimal holder to attach an ID card to a lanyard. Holds a single card securely. Sized for precise credit card size, can be scaled for other sizes. Just 2m of filament required. Print Recommendations | PETG…
This is a GoPro Lanyard mount. I wanted something to attach a GoPro to a standard tradeshow lanyard so my 4 year old could wear the camera around and take videos and photos without worrying about him dropping it. Solidworks 2016 file…
When I go skiing, I always am nervous pulling my phone out on the chairlift, worrying that even though I'm gripping it as hard as I possibly can… a bump on the ride is going to cause me to drop it. If I had even the slightest sense of…
Komboloi beads for type 1 (100) Paracord and lanyard beads for type 111 (550) paracord. Set of beads in different sizes to print your own komboloi. Also added 4 basic Paracord 550 lanyard beads (But are no use in the komboloi bracelet)…
This is a remix of the GoPro handgrip by Kart5a. I just added a hole in the bottom back of the grip to be able to put a wrist strap or lanyard. Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: Doesn't Matter…
DJI Mic Mini magnetic lanyard. I use a 2mm cord. The holes are 3mm for the cord. In case you are using magnet delivered with the Mic Mini, just press it in an you are good to go. In case you would be using other magnet, add a drop of glue…
Double Key Switch for double clickiness.
Introducing my latest creation: Lanyard EDC Threaded Cylinder Container . Key features: You can remix & improve the model freely! All the files are orientated for convenient printing in STP, STL & 3DM formats! No supports are required!…
From the original -- We're back with a chonkier, more balanced, even more fun fidget! Designed to be compatible with Cherry MX style key switches. Just add two of those, some key caps, and a lanyard. It's recommended to use XDA form…
Snap clip for standard 20mm wide lanyard strap and ID badge. Prints clean with no additional supports required. Reliable and secure. 2023-10-19 update | added wider version: Lanyard-Clip-3-cards-wide-2C01-0_MatthewGTaylor.STL . This will…
My girlfriend wanted a case for her new iPhone with a lanyard like she already had with the old one. After some search I didn't find anything similar for the iPhone 14 (non-pro version) so I designed mine. I had to print many versions…
This is a basic slide in ID card/badge holder with multiple options for attachment. Put it on your keyring, lanyard, or even add some elastic cord to affix the bade to a strap or other object. I orginally created this for the purpose of…
2 versions available: hole diameter 6 or 7.5mm layer height : 0.1 - 0.16mm no support
Lanyard mount for DJI RC-N1 remote controller. Modified size to fit nicely with both phones and tablets. Photo shows mounted with iPad Pro 11" (2018) Original design by VHF
Print with TPU for best results. I tried PLA first, but didn't seem like that'd last for too long. Hopefully won't need another one for another 20 years or so. Included FreeCad original so you can go nuts with customizations.
A Case for a Clipper Lighter to attach to your Keys, a Lanyard or whatever the heart desires. Prints in 2 Parts and you just glue them together Available in 3 Different versions 8 mm - Space between the “legs” is 8 mm 8 mm with Hole -…
Needed a way to hang a speaker from my disc golf bag. The speaker has a standard camera tripod screw (¼ - 20), so I made the part with a big enough eyelet to hook onto a carabiner. Could be used for a number of applications: Lanyard/strap…
I bought a used Volvo C30 and saw that it didn't have the OEM gas cap. I didn't like the fact that it didn't have a tether (and didn't want to hold it or place on the roof), so I made a tether to hold it in a similar fashion to the OEM…
Field Notes are great for capturing… well notes, but sometimes it'd be nice if you had something hard to write against. This little clip board has a spot for your pen and a loop for rope or a lanyard if you so choose. It fits most pens,…
Just a simple screw-in adapter to allow you to connect a lanyard or chain to your fan. The design is not perfect and does require you to drill a hole for the lanyard. Why? Because I'm silly and couldnt predict where the hole needed to be…
Created a 5x key version as requested by someone
Car Make: BMW Car Model: Z3 Car Year: 2002 Print this “Gas Cap Lanyard” if you loose yours or it breaks.
A horizontal ID Card holder for lanyards, for those who have to wear them for work- modified to hold a card on each side. Remixed from https://www.printables.com/model/187124-id-card-holder-for-lanyards
make your own paracord lanyard with a magnetic break away. just string the paracord through and tie a tight knot and pull knot into cap. Press fit 8mm x 3mm magnet into cap. If you want a drop of super glue for the magnet that's fine too.
Print on its side flat at 100% infill for maximum strength and to avoid snapping inside device.
“Can I have a new pen for my Promethean board, I've lost my old one”. If only teachers would look after the lovely equipment IT buy them… This clip is designed to attach a Promethean Pen to a standard lanyard clip, reducing the number of…
Update 4/6/21: I tweaked the design slightly to make the angles around the connection circle less...angular. This one is labeled V5 and since it’s an untested model I’ll leave V4 up just to be safe. This Thing is a lanyard tether that's…
A three-piece bracket, one mounts on wall, the other two bolt together around the 25mm/1” shaft. The shaft part has a lanyard loop that can be used with a shoulder harness. Max print size of largest object is 70x125mm on the x/y axis and…
Phone Lanyard Card for attachments, so you can connect different cords to your mobile device. It relays on the fact that your mobile phone is in a case and you can put the tail through the USB-C port hole. There are 2 versions available…
Also includes a version where airtag hole is covered up from the outside and not used. Negative holes render as positive in printables 3D preview btw.
This simple phone lanyard tab is a slim, durable insert designed to work with almost any phone and case combo. Simply place the tab between your phone and the case, letting the loop stick out through the charging port opening. The case…
A lanyard strap for KiCA jet fans, for fursuiters, cosplayers, and other mobile carry applications. Print in TPU
Hello everybody, here is a print I have designed for myself and family for a wearable sign/notice to wear on a lanyard or keys as a visible aid for other people that I'm deaf/hard of hearing along with some hints on how best to…
YubiKey Sleeve with lanyard strap loop. This is remix. I've added a loop a the top of the model to be used with lanyard plastic strap.
Dzielę się tym dla przyszłych pokoleń, długo szukałem czegoś takiego i w końcu znalazłem, więc oczywiście zamieszczam link do oryginału poniżej :)
Removed the lanyard hole using Anachronist's SCAD file. Easy to do, just saving others a few clicks potentially
My lanyard ID card holder for work kept breaking. After repairing it as much as practical, and not finding any spares in the office, I went to go find one to print. I needed it to hold 2 ID cards, and the options on here were very…
Portable Sewing kit with lanyard hole. It can hold various needles of differents sizes and 4 spools of string/fishing line. Printed in eSun pla.
This clips onto the short edge of a standard ISO/IEC 7810 ID-1 credit-card shaped card and provides an attachment hole. Adjust the snugness of the fit by scaling the model before printing, or sticking some tape to the card before slotting…
I always like adding lanyards to knives so I added a lanyard hole to the handle, plus I added some chamfers to the pins as well.
Remix to get more clearance for the hands when piloting by pinching the sticks. Hoping to get more stability also. Category: Hobby
Very simple print that holds the YubiKey securely along with my badge on the lanyard. Reasonably easy to remove if needed. 3mf included that provides a custom layer modification for 9mm-9.2mm to change the perimeters to 1 to assist with…
Printing Printed it at 0.3 layer Height Used 20% cubic infill Material-PLA Assembly Find 3 drywall screws you may want drywall anchors depending on how much weight your hang off it. screw in either the far left or far right screw in the…
A simple paracord lanyard bead for Gerber knives. Print with 100% infill, no supports. Each hole diameter is 4mm, and should just fit softer 550 paracord. Scale as necessary. Category: 3D Printing
This is a thinner version of OpenScad Lanyard in case speed is of the essence. Swap out the svg file for your own and update the code and re-render Print at .2 layer and speed Takes 21 min to print vs 68 minutes of the prior version (In…
Pause print at appropriate layer height and change filament in order to have dual color labels.
fix it with 4 to 4,5mm countersunk screw
Subaru gas cap door lanyard push pin/clip. Made to fit Subaru Outback -2008 but may fit more models. Will fit if the hole diameter is ~5.9-6.0 mm on the fuel door
This strap joint is designed for the CMF Phone series, including the CMF Phone 1 and CMF Phone 2 Pro. In the v1, the middle part was fixed, but in v2, it can now rotate freely. This makes the screw less likely to come loose. Printing…
Tired of not being able to swing your new CMF Phone 2 Pro around? Not anymore! With the new lanyard holder attached to your phone you can do it! (Swinging of smartphone not recommended)
Hex bit holder. Print in flex filament. Unscaled gives me a tight fit. Scale to 100.5 or 101% for a looser fit. Print a short version first to test bit retention. Infill: 0% for compact versions and 10-20% for plush versions. Magnetic…
My buddy was traveling and asked me to make a quick lanyard for his Uwell Caliburn G2. Not all nice and rounded, but it has open ports for the air vents and USB-C port on the bottom (and access to the charge light). Quick and dirty, but…
A modification of Axion's Jetfan lanyard adapter to make it fit the Kica JetFan 2. It can screw into either the intake or outake. You will need to drill a hole for the lanyard clip to attach to - so screw it on fully, mark where the hole…
