Lanyard card case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secure card case for a lanyard, easy to insert and remove a card.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 295
- Makes
- 2
- Views
- 956
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
Massive shoutout to the model used for inspiration! The measurements and primary design are from their model. I just felt some improvements could be made and did these
How to print
Print with regular supports and a support interface for the best result, in my case im printing with a 0.6 nozzle which leaves only 2 lines unsupported when printing v2.5. This causes no noticable sagging of the lines. In orca slicer there is a new support setting which allows the best of both tree and regular supports called hybrid supports, I have not tried this yet but this seems like it could be a great solution for 0.4 nozzles if the lines do sag.
How to use
To remove a card just use your pointer finger while applying pressure with your thumb to slightly bend the card.
Where is V1? V1 did exist but didn't have a cutout at the bottom like the original inspiration model. This made it difficult to remove cards, so I decided not to add it.
V2 vs V3
- Removed back at overhangs so supports can be placed directly on the print bed
- Added back “spine” so card stays in case while inserting it
- Increased wall thickness by 1mm and decreased overall width by 1mm
V3 vs V4
- Changed the way the back looks
- Changed the top overhang ever so slightly
- Decreased overall length by 1mm
UPDATED:
- Added v3 version
- Added v4 version
- Added v2.5 and v3.9
- Added tight tolerance versions so cards fit better