Counting matching models…
“The Longbeam […] was state-of-the-art, a brand-new design from the Republic shipyards on Hosnian Prime. It wasn't a warship per se, but it was no pushover either. […] It was a tough, beautiful beast, no doubt about it.” [ Charles Soule,…
Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…
This is my model of the Raptor Class Light Cruiser from the Show the Expanse. This ship appeared as the infamous Pella in the Free Navy colours. I however made it in its original MCRN colours and with my own name. (The colour structure is…
This is my model of the Ancient Cruiser from the Stargate Atlantis. The ship appeared only briefly in the episode Progeny. It is a kit, no glue required. The assembly is very easy but iI recommend to look at the assembly video just to be…
This is my model of the Scirocco Class Heavy Cruiser from the Show the Expanse. The model is a kit and does not require any glue. Unfortunately it is not done in scale with my previous MCRN ships as that would mean the ship would reach…
This is a 1:2,000 scale model of an Arquitens-class Light Cruiser from Star Wars with two versions. The Republic Arquitens ("print_sw_arquitens-republic.stl") is based on its appearance in Clone Wars, the Imperial Arquitens…
Rework of the 1:500 multi colour, multi plate model I originally made to allow it to be printed in a single colour, at smaller scale and in one go, rather than as separate parts. Designed using Fusion 360 from ship deck plans, photographs…
Now that the Arquitens class (the Class 546 variant anyhow) made a central role appearance as Moff Gideon's flagship in the latest season of The Mandalorian I've been able to completely rework my old model from new reference photos,…
Updated 30/9/23: Corrected a problem with the port side of the hull section not slicing correctly. See Iona S500 V2c file Also note that since releasing these complex multi part 1:500 ship models I have found that the BL printers are…
2 models, 1 with hole, 1 without 4 position throttle lever set. ALWAYS RIDE WITH KILL-SWITCH LANYARD SECURELY ATTACHED TO YOU! -Enjoy-
An original 100% custom-designed RC Cabin Cruiser hull optimized specifically for FDM 3D printing and easy RC hardware integration. This model features a modular architecture that breaks down into individual components, eliminating the…
This model was found on thingiverse: https://www.thingiverse.com/thing:5507861 by DIVMSTER who remixed it (added the magnet recesses) from the original: https://www.thingiverse.com/thing:3054777 by SkornoThePro I printed it for a family…
The 2024 Land Cruiser is a bit short on storage, especially if you have the Cool Box center console. This is a removable tray insert that still leaves enough space below for 12oz cans. Print in whatever material you have confidence can…
This is a very high detail model of a US Navy Ticonderoga class cruiser (CG) recommend 1.0 layer height or better and support blocks for the masts otherwise it is very hard to get the supports off without ripping off the mast.
This is my rough model of the Tomahawk BGM-109 Cruise Missile.
i cut it into easy to assemble parts and optimized it for printing
Federal Corvette model from Elite: Dangerous Model is split into three parts at the widest points Point the three parts vertically at the seam This work is strictly fanart and not meant for commercial distribution. All respected trade…
MMU remix Costa Atlantica cruise ship
This is a model 3mf so you can change the colors of the design on the back. Its an ode to pirate sailing coins.
Imperial Arquiten Light Cruiser for Star Wars Armada. Designed for resin 3D printers, for best result print the hull at 0.05mm with AA2 or 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop:…
To add a lock on the throttle, just put it on the handle and block it with an elastic band. Tested, it works great. Preferred material: PET-G Infill: 80% Printing time: 1:40:00
I present to you a free, printable model of French Navy Cruiser Submarine Surcouf from the game Mir Korabli. Model is at 1:625 scale (about 17cm long) and are remodeled from the ground up with the goal of maintaining details while also…
MCRN Scirocco Class Assault Cruiser from The Expanse. It measures about 495mm from the tail to the tip of forward antenna. Almost all the pieces were printed not using supports. I used supports on three of the mid-section structures. The…
A military ship that requires supports due to high detail and gun barrels. Tree Supports Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is my model of the Wraith Cruiser from Stargate Atlantis. The model is a kit, but some small greebles could definately use some small amount of glue to secure them in place. I really struggle with the organic-based look of the Wraith…
A sloppy attempt at one of the emblems on the early model FJ40 Land Cruisers. I traced a photo of the emblem in inkscape, exported layers to DXFs and imported them into OpenSCAD to union/difference the appropriate layers. Later models of…
Another Great file in the Star Wars Directory at https://3dwarehouse.sketchup.com/index.html All credit to the modellers there
This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…
I'm sharing this for non-commercial / sale use. Please don't steal and sell my design. I've seen numerous cup holders for the land cruiser fj80 and I figured I would design my own since I have a 3D printer sitting in the office. Included…
3D Benchy might be a good testing model, but with correct settings and with the printer more or less in good shape it is not really a challenge. I did the D4 Benchy Cruiser to test the printer and the slicer abilities harder. As modeled,…
Scale Model of P&O Cruises Ventura - for personal use only. Designed for multi colour printing on a Bambu Lab X1C or P1P with 8 Colours (2 x AMS). Before trying this model, or for other printers it is recommended you try this simpler…
I saw a side view of this when building the Chancellor and decided to give it a shot using a acclamator as the base of the ship Onils vindicator bridge and part of the praetor from Fall of the Republic and a piece of the veragitor. the…
Apparently hiding rubber ducks on cruise ships is a thing, so for my upcoming Royal Caribbean cruise I thought I'd make something special. I don't think this is what people mean when they talk about "Duck Boats". It has printed just fine…
I really enjoyed working on this model of the galactic starcruiser Halcyon. I made it as a Christmas present for my father-in-law who recently went on one of the last voyages before the experience closed at Disney World. I added a lot of…
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 3 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
Thanks to @trav_1593464 for letting me know that the holes for the pegs were left out of the original upload. The new 3mf has the holes in place. General: A model of the JASSM AGM-158 Stealth cruise missile by Lockheed Martin Why I…
This is a throttle lock that I've modelled for my 2017 Suzuki V-Strom 1000. I would not be surprised if it fits on other makes and models. First and foremost (got to cover the legals...) throttle locks are dangerous and perhaps even…
Link to improved version A replica of the imperial arquitens-class cruiser as seen in Star Wars Rebels. The model is at 1:10,000 scale. The photos show a larger print at 1:2,000 and a smaller one at 1:10,000. Print instructions I would…
This is to lock the rear window open at 30mm -Need a key to remove the hook, and could be stored on one of the gas strudes. Update : Support is not needed Improved fit Enhanced lock for the window *Note: -leaving the windows open will…
The Bilskirnir, also known as an Asgard mothership or Thor's chariot was Supreme Commander Thor's flagship before the O'Neill class was conceived. I've modelled it from reference photos, schematics and all possible material I could find,…
Republic Arquiten Light Cruiser for Star Wars Armada. Designed for resin 3D printers, for best result print the hull at 0.05mm with AA2 or 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop:…
-Two colors -organic support -0.15 layer height
This is a model of the Vanir Cruiser I designed. Just like the one shown in the SGA 5x10/11, it comes with several features. All the moving parts shown in the show are presented on the model as well and all are movable. I had to take few…
kit bashed the aurora and 304 to make this thought it was a cool looking ship so I tried to make it
The First Order Light Cruiser can often be seen docked at the nose of First Order Star Destroyers. It is 211,2m long, has four turrets and can carry 24 Tie Fighters and 1 Shuttle. UPDATE: Added 1:500 Scale Version Appearances in Star Wars…
Original description from Thingiverse model: I printed mrclauds Motorbike Cruise Control but it never stayed enough to go over bumps and whatnot, I remixed it into this. It allows you to put rubberbands on the front and backside, a nice…
I build this by butchering martin's Aurora and adding extra parts to fill in the gaps
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
I was looking for a generic cartoony cruise ship that resembled one from Royal Caribbean (with the Viking Crown Lounge surrounding the stacks), but couldn't find anything. As a last resort, I had ChatGPT create me a 2D caricature image…
Replacement enclosure for a two button Toyota key fob. Enclosure does not utilize the emergency button on back of unit. PETG with Prusament Antracit Grey (first layer) and Atomic Clear.
Pilota Per Modellini Di Aereo
The MPO 1400 Purgill-class Star Cruiser is a Passenger Liner from the High Republic Era. This is a model at 1:2,000 scale. It is 150mm long, 50mm wide and 44mm tall. The antennae are printed separately. There is a small notch at the base…
Printed in PETG - Prusament Antracit Grey is a pretty good color match.
The amazing model by Vez_nan had some inaccuracies, so I upgraded the bridge a bit and added some details along with making a new ram at the prow and finishing up by slicing the model in my opinion, in the most convenient way possible.…
The Overlord-Class Battlecruiser uploaded by Skaltar is really neat, but it prints horribly. So I ported the model to Meshmixer, where I solidified it. I then brought it into Blender and filled in other gaps, and restored lost details. I…
I like the simplicity of this trailer and wanted to adapt it to fit the MN82 Land Cruiser. I scaled all parts to 125%. The drawbar was modified to fit the printable trailer hitch . It fits the standard MN82 and even my slightly lifted…
Land Cruiser 70 Series Cup Holder Armrest hooks in the door sill and you add double sided tape to the back. Ive added blank armrests and a step. file if you want to add your own text. Length is about 450mm
This is my 86mm long Minbari Sharlin cruiser from Babylon 5. Its in the same scale as my 92mm Omega Destroyer, and the Revell Babylon 5 station model kit. I printed it on an Anycubic Photon at a 0.05mm layer height. It is intended for…
FJ keychain Print Settings Printer: Ultimaker 2+ Rafts: Doesn't Matter Supports: No Resolution: 0.15 Infill: 20-60 Filament: PLA PLA Post-Printing ============= Category: 3D Printer Accessories
Removeable tray insert for 2024 Toyota Land Cruisers with the center console cool box
EN: I lost my fin for my BlueFin Cruise SUP board so I designed one my own and printed it. I have the 10´8 version so I dont know whether It fits for the bigger versions. DE: Ich habe ein Bluefin Cruise SUP in der 10,8 Fuß Version und…
Made for my 100 series landcruiser manual edition. Didn't like the look of the ones you could buy so I made my own. Thought I would share so others can use and not need to buy.
I managed to make a 3d model of the biggest cruise ship in the world, which is the Icon of the Seas.
The Maxima-a Heavy Cruiser appeared in the Poe Dameron Comic. This model is based on its earlier appearances. (There were many changes in later issues and I like the earlier version better.) The model is 122mm long, 103mm wide and 51mm…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet
I created this model by hand using Blender 3D, with the help of two reference images! Also, yes, you are definitely free to modify this model... just do not sell it online, only in real life, as a toy or model, etc.
Having 2020 blues about your vacation plans being canceled. Well dwell no more and print a piece of your vacation. Designed for the MMU or the Palette, it is not able to be printed in multiple parts then be glued together. Please post…
You can easily slip your Princess Cruise medallion into this holder and attach it to a strap or wristband. The fit is tight enough that the medallion won't fall out unless the holder is broken, and a secondary hole was added to allow the…
Toyota LandCruiser FJ40 1977 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
One part Dreadnaught If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons, you will get free and exclusive model, Etsy shop deal and the ability to vote…
FJ Cruiser airless Tyre 1:10 for Rim: https://www.printables.com/cs/model/94963-rc-fj-cruiser-19-wheel-12mm-hex Material TPU (Flexible)
You can scale it down up to 60% if you print with 0.4 nozzle. Made it divided to several parts for easy multicolor print. Minimal supports needed. Only parts you really should glue is fins, those little pins just can't hold them strong…
Cruiser Tray-packing puzzle by Stewart Coffin (STC #167) Fit all four pieces into the rectangular opening. Cruiser is one of a series of tray-packing puzzles by Stewart Coffin. (The other puzzles in the series can be found on the Stewart…
This is my entry on the Voxelab contest! Please support me by liking the design on Cults3d: https://cults3d.com/en/3d-model/game/voxelab-cults-car-4x4 Print Settings Printer: Biqu B1 Rafts: No Supports: Yes Resolution: 0,2 Infill: 15…
A little clamp that arrests the accelerator lever paddle on an e-scooter with a ⌀22mm handle bar in a fixed position by friction. This sets the throttle to a certain position while avoiding sore thumbs.
This is a 1.9" RC wheel modelled off the factory rims on my 2007 FJ Cruiser. Fits 1.9" tires. (1.9"=48.26mm) Dimensions before material shrinkage: 21.3mm wide 49mm diameter +2.5mm offset 12.35mm hex 4.5mm center hole Printing in PLA fits…
When you want to go down a river that goes on for Niles... and Niles... and Niles... This model is based off of the original blueprints for the ride vehicles that ply the waters of Disneyland. I finally got a chance to test print my…
The Deluxe Game of Galactic Cruise had cardboard trays that were a bit too snug for the Blueprints, Cockpit, and Engines. I designed these as a nice alternative. I printed with 20% Infill on PLA Plus.
GME MB206/MB207 backing plate contoured to the dash trim in the Toyota LandCruiser Prado 150 for easy mounting. Both left and right side trim variant .stl files are provided, use the correct one for the side you wish to attach the mount…
Remixed cup holder to allow space for a phone
A replacement for Toyota FJ Cruiser windshield Wiper bolt cover. *Support not required *Print with heat resistance material Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.15 ~ 0.2 Infill:…
Dies ist ein Ersatzgriff für den Carrycruiser von Reisenthel. Da dieser schon 2-mal gekauft werden musste, habe ich ihn diesmal mit Fusion 360 gezeichnet. Gedruckt mit Ender 3 v2. Der Griff wurde getestet, und die Mechanik funktioniert.…
This will bracket will allow you to mount Diode Dynamics SSC1 LED Pod in place of OEM FJ cruiser mirror light -The Cover will fit both the Driver and Passenger side, but the bracket the side specific. *Note: This will require running new…
Liberator Cruiser For star wars armada. Designed for resin 3D printers, for best result print at 0.05mm with AA2 or 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop:…
*From Wikipedia: The BGM-109 Tomahawk Land Attack Missile (TLAM) is an American long-range, all-weather, jet-powered, subsonic cruise missile that is primarily used by the United States Movie and Royal Navy in ship and submarine-based…
This is a custom designed "dashboard accessory platform" for the 1995-97 series Toyota Land Cruisers allowing for the mounting of a variety of accessories such as phones, small tablets, radios, switch panels and more with the use of 20mm…
This is front speaker adapter is made to both provide magnet space, and convert the size from 4.5" to 6". I used this to mount dayton reference 6" midbass drivers into the front door of my 91 FJ80 LandCruiser. The inner mount provides a…
Maqueta de la nave G'Quan Heavy Cruiser de Babylon 5
Vindicator and Immobilizer 418 cruiser for Star Wars Armada. Designed for resin printers. If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons, you will…
Part was originally designed to work with a generic Amazon front facing camera and printed on a Form Labs Form2 in their “tough” resin, then painted black. FDM prints tend to have the legs break off so may not be suitable. A redesign that…
Battleships For Micro Armor Including Patrol Boat, Submarine, Battleship, Cruiser, Battleship
Discover my collection of motorcycle-themed keychains! Each keychain features a unique design inspired by the world of motorcycles. From classic bikes to choppers, these keychains are perfect for any motorcycle enthusiast. I think they…
Double cupholder for the Delta Shifter Console for the Land Cruiser 80 - FJ80/FZJ80/LX450/etc. Fits an energy drink/soda can, and a Hydroflask. Matches the body lines of the console. Bolts in using 3 ¼-20 bolts. No real great way to print…
You need 1 piece screw 4mm with nut. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 70% Filament: Spectrum ASA 275 black Notes: You need 1 piece screw 4mm with nut. Category: Automotive
I never use the cool box function on my 2025 Land Cruiser so I wanted to make the space into a a more organized compartment. Remixed a model tray I found on another website that fits the upper portion of the coolbox. It now fits in the…
Lunar rover used in the Apollo 13-17 missions and quite possible will be used again in future Artemis Missions
IJN Japanese cruiser from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No hWAlls: 2 This is a stylized model by Subhunter59 and is for free use.
