Lanyard Safety Clip (Can also be used for Medals)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Lanyard or Medal Safety Clip This will take a 1 inch or 25mm wide ribbon.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 293
- Makes
- 3
- Views
- 1,711
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A Lanyard or Medal Safety Clip
This will take a 1 inch or 25mm wide ribbon.
Pulling on the lanyard will result in the clip pulling apart so it doesn't get stuck.
Once printed test the pushing together and pulling apart of the two pieces, if still to tight use a piece of sandpaper to rub down the small nodule on the male connector until you get the desired pull apart strength.
Print instructions
Once printed test the pushing together and pulling apart of the two pieces, if still to tight use a piece of sandpaper to rub down the small nodule on the male connector until you get the desired pull apart strength.