1 / 2
Lanyard Safety Clip (Can also be used for Medals) — zdjęcie 1
1 / 2

Lanyard Safety Clip (Can also be used for Medals)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Lanyard or Medal Safety Clip This will take a 1 inch or 25mm wide ribbon.

Ocena
5 / 5
Polubienia
47
Pobrania
290
Wydruki
3
Wyświetlenia
1701
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A Lanyard or Medal Safety Clip

This will take a 1 inch or 25mm wide ribbon.

Pulling on the lanyard will result in the clip pulling apart so it doesn't get stuck.

Once printed test the pushing together and pulling apart of the two pieces, if still to tight use a piece of sandpaper to rub down the small nodule on the male connector until you get the desired pull apart strength.

Print instructions

Once printed test the pushing together and pulling apart of the two pieces, if still to tight use a piece of sandpaper to rub down the small nodule on the male connector until you get the desired pull apart strength.

Tagi