Card Clip - Lanyard Card Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach an ID or other card to a lanyard - simple, robust and minimal materials required.
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 177
- Makes
- 0
- Views
- 955
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple, robust and minimal holder to attach an ID card to a lanyard. Holds a single card securely. Sized for precise credit card size, can be scaled for other sizes. Just 2m of filament required.
Print Recommendations | PETG material, 0.2 to 0.4mm layer thickness, 3 perimeters. Print with model standing on edge on the flat surface as shown. Use paint-on supports for the shallow overhanging wall as shown. If you have trouble with bed adhesion in this orientation, a little hairspray or glue stick does wonders.
PLA could also be used, with a couple of considerations:
- Don't leave it in your car, it may eventually warp due to the lower temperature limits for the material.
- You may need to adjust the scaling to be slightly smaller in the width and height directions of the card, seems like PLA shrinks slightly less for me.
I hope you find it useful! I'd love to see pictures of it out in the wild.
Designed in Solidworks for Makers.