1 / 1
Phone Lanyard card attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert into a phone case for a lanyard to be attached.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 492
- Makes
- 5
- Views
- 2,466
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Similar to https://www.amazon.com/SHANSHUI-Lanyard-Tether-Universal-Smartphones-Black/dp/B083158CBJ
When importing STL swap the print face around as the tether hole is thicker by 1mm.
I recommend printing with TPU, I used 95A eSun filament and it works quite well.
For extra strength set 5 perimeter and use concentric top and bottom fill pattern, I left the normal infill as rectilinear at 100%.
So far 9 months later TPU is still perfect with no sign of wear.